Read Sony SAL16F28 Service Manual online
HELP
SAL16F28 (2.8/16 FISH-EYE) (16mm F2.8 Fisheye)
HELP03
Adhesive bond(B-40): J-6082-614-A
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Don’t use what becomes white after drying like a quick-drying glue.
1.
After applying the bond (LOCTITE 460) to the back side of mount index, insert it in the specified hole of outer barrel and fix it.
2.
Apply the bond (B-40) to the tips of 3 screws shown in figure and tighten the screws.
HELP04
Note:
After the flange back (f’F) adjustment, affix the focus scale plate.
1.
Set the focus ring to vicinity of infinity.
2.
Align the V groove of outside barrel with the “center of infinity” of the focus scale plate, and affix the polyester tape (black) 10mm.
Note:
Make sure the polyester tape (black) 10mm does not protrude out of white line of focus scale plate.
22 16
11
22
16
11
8
8
4
4
Outer Barrel
Apply the adhesive bond(B-40)
Apply the adhesive bond(B-40)
Apply the adhesive bond(LOCTITE 460)
Apply the adhesive bond(B-40)
Mount Index
1.5
0.5
0.3
0.8
0.7
0.25
0.2
1
3
1
∞
Polyester Tape (Black) 10mm
Polyester Tape (Black) 10mm
White line
infinity
V groove
Focus Scale Plate
Click on the first or last page to see other SAL16F28 service manuals if exist.