Read Sony SAL16F28 Service Manual online
HELP
SAL16F28 (2.8/16 FISH-EYE) (16mm F2.8 Fisheye)
Connection Barrel
Apply the grease(G-10)
Apply the adhesive bond(B-40)
Apply the adhesive bond(B-40)
Apply the adhesive bond(B-40)
Apply the adhesive bond(B-10)
Filter Link Lever
Filter Link Lever Stopper Screw
Filter Holding Block
Filter Block
Filter Link Fork
Filter Holding Plate Stopper Pin
A part
(All circumfference)
Washer
Washer
HELP14
Adhesive bond (B-10): J-6082-612-A
Adhesive bond (B-40): J-6082-614-A
1.
Tighten the two screws shown in figure and apply the bond (B-10) to the tip of two screws.
2.
Apply the adhesive bond (B-40) to the tip of filter holding plate stopper pin and tighten it.
Note:
When tighten the filter holding plate stopper pin, minimize gap of the filter holding block and select the washer B so that the
filter holding block may move lightly.
3.
Press-fit the filter link lever into the portion A.
4.
Apply the adhesive bond (B-40) to the tip of filter link lever stopper screw and tighten it.
Note:
When tighten the filter link lever stopper screw, minimize gap of the filter link fork and the filter link lever, and select the
washer so that the filter link lever may move lightly.
5.
Adjust the filter position by loosening two screws fixing the filter so that the filter frame dose not eclipse the lenses in the middle ball
group lens block.
6.
Check that the filter block should be moved smoothly by the force of filter link spring.
NORMAL
A-12
O-56
B-12
Click on the first or last page to see other SAL16F28 service manuals if exist.