Read Sony SAL1680Z Service Manual online
HELP
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
3.
Inserting the tip of 4th operation plate in the linear guide groove, assemble the rear barrel assembly into the outer tube.
4.
Select the 3rd lens block guide roller fitting to the grooves of zoom cam ring and outer tube and install it in the guide grooves. Then,
tighten the 3rd lens block guide pin of which the screwed portion is applied with the adhesive bond (B-40). (Install at three locations.)
Par Number
Part Name
Dimension (mm)
Diameter of D
Diameter of d
3-197-211-01
3rd Lens Block Guide Roller
4.81
4.61
3-197-212-01
3rd Lens Block Guide Roller
4.81
4.62
3-197-213-01
3rd Lens Block Guide Roller
4.81
4.63
3-197-216-01
3rd Lens Block Guide Roller
4.82
4.61
3-197-217-01
3rd Lens Block Guide Roller
4.82
4.62
3-197-218-01
3rd Lens Block Guide Roller
4.82
4.63
3-197-219-01
3rd Lens Block Guide Roller
4.83
4.61
3-197-220-01
3rd Lens Block Guide Roller
4.83
4.62
3-197-221-01
3rd Lens Block Guide Roller
4.83
4.63
Rear Barrel Assy
3rd Lens Block Guide Roller
3rd Lens Block Guide Roller
Outer Tube
3rd Lens Block
Guide Roller
Guide Roller
3rd Lens Block Guide Pin
3rd Lens Block
Guide Pin
Guide Pin
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
3rd Lens Block Guide Pin
D
d
Click on the first or last page to see other SAL1680Z service manuals if exist.