Read Sony SAL1680Z Service Manual online
HELP
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP24
Adhesive bond (B-40): J-6082-614-A
Note:
Before assembling, confirm that the rear barrel assembly moves smoothly.
After replacing the rear barrel assembly, adjust the aperture diameter.
1.
Adjust by rotating the zoom cam ring so that the 4th operation plate comes in the middle (groove position at the side of outer tube) of
two small legs of outer tube.
At this moment, confirm that the narrow width lever of focus coupling barrel assy positions at the location shown in the figure.
2.
Aligning the screw hole with the linear guide groove at the side, adjust the rear barrel assembly to reference position.
Leg
Leg
4th Operation Plate
Zoom Cam Ring
Narrow lever
Outer Tube
Screw Hole
Straight guide
groove
groove
Reference position
Rear Barrel Assy
Click on the first or last page to see other SAL1680Z service manuals if exist.