Read Sony SAL1680Z Service Manual online
HELP
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP19
Grease (G-15): J-6082-619-A
1.
Apply the grease (G-15) to the gear of focus ring and the indicated portion.
2.
Rotate clockwise the focus lens holder as far as it goes and set the zoom to the wide end.
3.
Place the long side of focus stopper to the gear side as shown in the figure and install it in the groove of focus ring.
4.
Aligning the end of gear of focus ring with the hole of outer barrel as shown in figure, assemble the focus ring into the outer barrel
assembly.
5.
Turn a little clockwise the focus ring so that the screw holes of focus stopper can be seen in the two holes of outer barrel assembly.
6.
Tighten two screws.
Long
Short
Focus Ring
Focus Stopper
Focus Lens Holder
Screws
Apply the grease
(G-15)
(All circumferences)
(G-15)
(All circumferences)
Outer Barrel Assy
Apply the grease (G-15)
(Gear)
(Gear)
Click on the first or last page to see other SAL1680Z service manuals if exist.