Read Sony SAL1680Z Service Manual online
HELP
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP16
Adhesive bond (B-40): J-6082-614-A
1.
Set the zoom to the tele end.
2.
Set the index with red color of 1st lens holder block to the focus scale window side and push the guide bush at three locations in the
guide groove straightly.
3.
Apply the adhesive bond (B-40) to the screwed portion of zoom coupling pin and tighten the zoom coupling pin.
HELP17
1.
Align the projection of focus ring B of MF operation ring block with the pinch lever.
2.
Aligning three projections of focus ring B with three cut portions of outer tube, install the focus ring B.
Then, holding its lower part by hand, turn clockwise the MF operation ring block and install it.
Guide groove
Index with red color
Guide bush
Index with
red color
red color
Guide groove
Focus Scale Window
Apply the adhesive bond (B-40)
Zoom Coupling Pin
MF Operation Ring
Cut portion of outer tube
Pinch Lever
Projection of focus ring B
Hold this portion
and turn it.
and turn it.
Click on the first or last page to see other SAL1680Z service manuals if exist.