Read Sony SAL1680Z Service Manual online
HELP
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP08
Adhesive bond (B-10): J-6082-612A
1.
Install the rotation cover pin in the groove as shown in the figure.
2.
Apply the adhesive bond (B-10).
HELP09
1.
Clean the inner and outer sides of focus scale window of outer cover block.
2.
Place the focus scale window of outer cover block to the index side, insert three projections at inner side to the rib-less portion of
outer barrel assembly aligning them, and rotate it in the arrow direction until it clicks.
3.
Confirm that no scar is found on the focus scale window and no grease is attached.
Apply the adhesive bond (B-10)
Outer Cover Block
Outer Barrel Assy
Rotation Cover Pin
Index
Projection
Outer Cover Block
Focus Scale Window
Click on the first or last page to see other SAL1680Z service manuals if exist.