SAL1635Z2 - Sony Digital Camera Service Manual (repair manual). Page 12

2-9

SAL1635Z2 (Vario-Sonnar 2.8/16-35 ZA SSM II) (Vario-Sonnar T* 16-35mm F2.8 ZA SSM II)

4.  Align the convex portion of Distance Block ASSY with the concave portion of Focus Connect Ring by rotating the Distance Block 

ASSY and drop completely the SSM Block ASSY in the Optics Block ASSY.

 

SSM  Block Assy

Convex portion of
Distance Block ASSY

Concave portion of
Focus Connect Ring

SSM  Block Assy

Optics  Block Assy

Optics  Block Assy

5.  Tighten one screw. (one location)
6.  Apply adhesive bond (B-40) to about two threads from the tips of screws and tighten the SSM Block ASSY with the screws. (three lo-

cations)

 

Apply adhesive 
bond (B-40).

Grease (G-119): 

J-6082-708-A

Adhesive bond (B-40):  J-6082-614-A

1.  Apply grease (G-119) to the indicated portion of Distance Block ASSY.

 

Cross section

Inside

Apply grease 
(G-119)

Apply grease 
(G-119)

Apply grease 
(G-119)

Distance Block ASSY

2.  Install the Distance Block ASSY, aligning the hole at the upper side of the Distance Block ASSY with the round concave portion of the 

Optics Block ASSY.

3.  Install the Focus Operation Ring Hold Roll in the holes (three locations) at the upper side of the Distance Block ASSY.
 

Apply the adhesive bond (B-40) to about two threads from the tips of screws and tighten the Focus Operation Ring Hold Rolls with 
screws.

 

Focus Operation Ring Hold Roll

Focus Operation Ring Hold Roll

Focus Operation Ring Hold Roll

Holes at Upper side

Optics Block ASSY

Round Concave Portion

Apply adhesive 
bond (B-40).

Apply adhesive 
bond (B-40).

Apply adhesive 
bond (B-40).

Distance Block ASSY