Read Sony SAL1635Z2 Service Manual online
2-4
SAL1635Z2 (Vario-Sonnar 2.8/16-35 ZA SSM II) (Vario-Sonnar T* 16-35mm F2.8 ZA SSM II)
2. Apply grease (G-115) the indicated portion of Rear Outer Block ASSY.
Slip Portion
Rear Outer Block ASSY
Bearing Surface
Wall Surface
Apply grease (G-115)
(All circumference)
(All circumference)
Apply grease (G-115)
(All circumference)
(All circumference)
HELP03
1. Install three flexible boards and one part to be soldered to the SSM PC Board Block ASSY and fix them with two screws.
Solder Installation
position
position
SSM PC Board Block ASSY
Encoder Flexible
Board
Board
MR Flexible Board
SSM Flexible Board
SW Flexible Board
2. After soldering the SSM Flexible Board, make folds.
Note:
Use the plastic tweezers.
3. Fold the SSM Flexible Board and fix it with the polyimide sheet by covering.
Note:
Be careful for the polyimide sheet not to protrude to the groove (SSM PC Board Block ASSY) for lever of Aperture Preset Lever.
SSM Flexible Board
SSM Flexible Board
SSM Flexible Board
Polyimide Sheet
Be careful for the polyimide sheet not to protrude
to the groove for lever of Aperture Preset Lever.
to the groove for lever of Aperture Preset Lever.
Tweezers
SSM PC Board Block ASSY
SSM PC Board
Block ASSY
Block ASSY
HELP04
1. Cut the tips of brush.
Brush
Tip Portion
Tip Portion
Brush
Click on the first or last page to see other SAL1635Z2 service manuals if exist.