SAL1635Z2 - Sony Digital Camera Service Manual (repair manual). Page 11

2-8

SAL1635Z2 (Vario-Sonnar 2.8/16-35 ZA SSM II) (Vario-Sonnar T* 16-35mm F2.8 ZA SSM II)

1.  Fold upward the flexible board of Switch ASSY at the locations shown in the figure.

 

Switch ASSY

Flexible Board

Valley fold

2.  Inserting the flexible board of Switch ASSY in the hole of Outer Barrel, affix the Switch ASSY to the Outer Barrel by the SW Adhe-

sive Sheet.

 

Flexible Board

SW Adhesive Sheet

Switch ASSY

Flexible
Board

Outer Barrel

SW Adhesive Sheet 
(Included in Switch ASSY)

3.  Affix the flexible board (Switch ASSY) to the step of inside of the Outer Barrel.

  Affix it with no place under the flexible board.

 

Flexible Board (Switch ASSY)

Step of inside of the Outer Barrel

Affix it with no place under 
the flexible board.

Adhesive bond (B-40): J-6082-614-A

1.  Turn the Focus Connect Plate of the SSM Block ASSY to near end in the arrow direction.
2.  Turn the U groove of the Optics Block ASSY to near end in the arrow direction.

 

SSM  Block ASSY

Optics Block ASSY

Focus Connect Plate

U Groove

Turn to near end.

3.  Install the SSM Block ASSY to the Optics Block ASSY.

  Align the focus connect plate of the SSM Block ASSY with the U groove of Optics Block ASSY.

 

Focus Connect Plate

U Groove

SSM  Block ASSY

Optics  Block ASSY