Read Sony SAL135F18Z Service Manual online
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
2.
Put the F-ECD flexible board through the oblong hole of focus hold barrel block.
3.
Align the positioning pin of length grove barrel assy to the pin hole of focus hold barrel block.
4.
Install it with rotating the torque ring A of focus hold barrel block.
Note:
Align the stopper of focus 1 cam ring assy with the cam joint ring of focus hold barrel block.
5.
Tightening four screws (white) (screws 1 to 4 in figure) and five screws (black) (screws 1 to 4 in figure) in orders shown in figure,
fix the outer barrel block to the length grove barrel assy.
6.
Apply the adhesive bond (B-10) to the heads of nine screws.
7.
Perform the torque ring play adjustment. (Refer to 4-6.)
Screw (Black)
Apply the adhesive bond (B-10)
Apply the adhesive bond (B-10)
Screw (White)
Apply the adhesive bond (B-10)
Apply the adhesive bond (B-10)
Focus Hold Barrel Block
Pin hole
FH Button Mail Flexible
Torque Ring A
Positioning Pin
Oblong hole
F-ECD Flexible
Length Grove Barrel Assy
Stopper
Click on the first or last page to see other SAL135F18Z service manuals if exist.