Read Sony DSC-WX150 (serv.man2) Service Manual online
DSC-WX150_L2
1-5
1-7. PROCESS AFTER FIXING FLASH ERROR
When “FLASH error” (Self-diagnosis Code E : 91 : 01) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed
automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be on the HOME screen.
automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be on the HOME screen.
Method for Initializing the Flash Error Code
Reset Flash Error using the Flash Error Repair Tool Ver_[].[].exe.
1-8. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD
Note: As for the figure below, this model and the shape
of the main body are different.
Barrier Assy
Claws
Claws
Barrier Assy
Claws
Claws
Hole
Barrier
Lever
Installation
Removal
Ornamental Ring A
Barrier Tapes
Barrier Assy
Barrier Tapes
Ornamental Ring A
Disengage the four claws and remove the Barrier Assy.
Fit the four claws while inserting the Barrier Lever into the hole and attach the Barrier Assy.
Peel off the release papers of the Barrier Tapes.
Install the Ornamental Ring A and press it lightly.
Install the Ornamental Ring A and press it lightly.
Turn on the power switch and extend the lens (TELE end).
Detach the battery.
Apply alcohol to two gaps A of the Ornamental Ring A with tweezers or a fine-tipped stick as shown below.
Turn the Ornamental Ring A clockwise and counterclockwise to detach it.
Detach the battery.
Apply alcohol to two gaps A of the Ornamental Ring A with tweezers or a fine-tipped stick as shown below.
Turn the Ornamental Ring A clockwise and counterclockwise to detach it.
Solvent
A
Tweezers
Click on the first or last page to see other DSC-WX150 (serv.man2) service manuals if exist.