DSC-WX150 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 2

DSC-WX150_L2

– 2 –

Image device: 7.76 mm (1/2.3 type)
 

Exmor R CMOS sensor

Total pixel number of camera:
 

Approx. 18.9 Megapixels

Effective pixel number of camera:
 

Approx. 18.2 Megapixels

Lens: Sony G 10× zoom lens
 

f = 4.45 mm – 44.5 mm (25 mm – 250 mm 
(35 mm film equivalent))

 

F3.3 (W) – F5.9 (T)

 

While shooting movies (16:9):

 

27.5 mm – 275 mm*

 

While shooting movies (4:3):

 

33.5 mm – 335 mm*

 

*  When [Movie SteadyShot] is set

to [Standard]

SteadyShot: Optical
Exposure control: Automatic exposure,
 

Scene Selection (15 modes)

White balance: Automatic, Daylight,
 

Cloudy, Fluorescent 1/2/3,

 

Incandescent, Flash, One Push

Underwater White balance: Automatic,
 

Underwater 1/2, One Push

Signal format:
 

For 1080 50i: PAL color, CCIR

 

standards HDTV 1080/50i

 specification
 

For 1080 60i: NTSC color, EIA

 

standards HDTV 1080/60i

 specification
File format:
 

Still images: JPEG (DCF, Exif,

 

MPF Baseline) compliant, 

 DPOF 

compatible

 

3D still images: MPO (MPF Extended 
(Disparity Image)) compliant

 

Movies (AVCHD format):

 

AVCHD format Ver. 2.0 compatible

 Video: 

MPEG-4 

AVC/H.264

 

Audio: Dolby Digital 2ch,

 

equipped with Dolby Digital Stereo Creator
•  Manufactured under license from

Dolby Laboratories.

Movies (MP4 format):
 Video: 

MPEG-4 

AVC/H.264

 

Audio: MPEG-4 AAC-LC 2ch

Recording media: Internal Memory
 

(Approx. 19 MB), “Memory Stick Duo” 
media, “Memory Stick Micro” media, 
SD cards, microSD memory cards

Flash: Flash range (ISO sensitivity
 

(Recommended Exposure Index) set to Auto):

 

Approx. 0.2 m to 3.7 m

 

(7 7/8 inches to 12 feet 1 3/4 inches) (W)

 

Approx. 1.5 m to 2.2 m

 

(4 feet 11 1/8 inches to 7 feet 2 5/8 inches) (T)

HDMI connector: HDMI mini jack
Micro USB connector:
 USB 

communication

USB communication: Hi-Speed USB
 (USB 

2.0)

LCD screen:
 

7.5 cm (3.0 type) TFT drive

Total number of dots:
 

460 800 dots

Power: Rechargeable battery pack
 NP-BN, 

3.6 

V

 

AC Adaptor AC-UB10/UB10B,

 5 

V

Power consumption (during shooting):
 1.0 

W

Operating temperature: 

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature: 

–20 °C to +60 °C (–4 °F to +140 °F)

Dimensions (CIPA compliant):
 

94.7 mm × 56.4 mm × 21.6 mm

 

(3 3/4 inches × 2 1/4 inches × 7/8 inches) 
(W/H/D)

Mass (CIPA compliant) (including NP-BN
 

battery pack, “Memory Stick

 Duo” 

media):

 

Approx. 133 g (4.7 oz)

Microphone: Stereo
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III:
 Compatible

Power requirements: AC 100 V to
 

240 V, 50 Hz/60 Hz, 70 mA

Output voltage: DC 5 V, 0.5 A
Operating temperature: 

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature: 

–20 °C to +60 °C (–4 °F to +140 °F)

Dimensions:
 

Approx. 50 mm × 22 mm × 54 mm

 

(2 inches × 7/8 inches × 2 1/4 inches) 
(W/H/D)

Mass:
 

For the USA and Canada: 
Approx. 48 g (1.7 oz)

 

For countries or regions other than

 

the USA and Canada: 
Approx. 43 g (1.5 oz)

Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 0.9 A
Capacity:
 

typical: 2.3 Wh (630 mAh)

 

minimum: 2.2 Wh (600 mAh)

Design and specifications are subject to
change without notice.

Model

DSC-WX150

Destination

US

CND, E, KR

UK, CH

AEP, E

Color system

NTSC

NTSC

PAL

PAL

TransferJet

• Abbreviation
  CH :  Chinese model
  CND :  Canadian model
  KR :  Korea model

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH 
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS 
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY 
SONY. 

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES 
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT 
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES 
SUPPLÉMENTS PUBLIÉS PAR SONY.

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.

This unit uses unleaded solder.
Boards requiring use of unleaded solder are printed with the lead free 
mark (LF) indicating the solder contains no lead.
(Caution:  Some printed circuit boards may not come printed with the 

lead free mark due to their particular size.)

Be careful to the following points to solder or unsolder.

•   Set the soldering iron tip temperature to 350 °C approximately. 

If cannot control temperature, solder/unsolder at high temperature 
for a short time.
Caution:  The printed pattern (copper foil) may peel away if the 

heated tip is applied for too long, so be careful!  

Unleaded solder is more viscous (sticky, less prone to 
flow) than ordinary solder so use caution not to let solder 
bridges occur such as on IC pins, etc.

•   Be sure to control soldering iron tips used for unleaded solder and 

those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.

After correcting the original service problem, perform the following 

safety checks before releasing the set to the customer.

1.  Check the area of your repair for unsoldered or poorly-soldered 

connections. Check the entire board surface for solder splashes and 
bridges.

2.  Check the interboard wiring to ensure that no wires are “pinched” 

or contact high-wattage resistors.

3.  Look for unauthorized replacement parts, particularly transistors, 

that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.

4.  Look for parts which, through functioning, show obvious signs of 

deterioration. Point them out to the customer and recommend their 
replacement.

5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
 

•   Set the soldering iron tip temperature to 350 °C approximately.

 

•   Do not touch the soldering iron on the same conductor of the circuit 

board (within 3 times).

 

•   Be careful not to apply force on the conductor when soldering or 

unsoldering.