DSC-WX150 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 11

DSC-WX150_L2

1-9

White Part

Thinnest Groove

Cam Tube B

Cam Tube B

Lever

Cutout

Straight Tube

Straight Tube

3 Group Assy

Straight Tube Block

2 Group Frame

2 Group Frame

Shaft of 3 Group Assy

Top side view

1. Align the Lever with the cutout as shown in the figure, and then install the Straight Tube to the Cam Tube B.
    Note: Be sure to set the Straight Tube at the correct insertion position.
2. Turn the Straight Tube in the arrow direction to the maximum.

3. Install the Straight Tube Block aligning the thinnest groove with the white part as shown in the figure, and then turn 
    the Cam Tube B in the arrow direction to the maximum.

4. Install the 2 Group Frame at a position where the Shaft of 3 Group Assy is visible through the cutout of the 2 Group Frame.

3 Group Assy

Lever

Lever

1 Frame Assy

Cabinet Number

Flexible Board

Claws

Main Body

Claws

Cam Tube A

Rotary Cam Tube

Semicircular 

Cutout

Gear Edge

Rotary Tube

Stationary Tube Assy

8. Install the Rotary Cam Tube to the Rotary Tube aligning the semicircular cutout with the Gear edge.
9. Install the Stationary Tube Assy at the position shown in the figure as a guideline.
    Note: Be sure to install the Rotary Cam Tube with the semicircular cutout and the Gear edge set in the "OK" state shown in the figure.

10. Install the Main Body so that the Flexible Board position matches the hole to pass the Flexible Board.

5. Install the 1 Frame Assy so the Lever positions match.
    Note: Confirm that the Barrier closes when the 1 Frame Assy is pushed.

6. Set the 3 Group Assy in the groove in the orientation where the Flexible Board comes to the nearly opposite side of the cabinet number 
    on the Cam Tube A.
    Note: Be sure to set the 3 Group Assy at the correct insertion position.

7. Push the 3 Group Assy until the three claws lock.

OK

NG