Read Sony DSC-W730 (serv.man2) Service Manual online
DSC-W730_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Method of Battery Terminal Board.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-1005
Board.
* Battery terminal board is attached with
notch for installation.
Board.
* Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
(reflow soldering )
Notch
SY-1005 Board
Battery terminal board
Notch
Battery terminal
board
board
Assembly-2: Multi Connector (Rec) 8P Soldering Position.
SY-1005 Board
SY-1005 Board
Multi Connector
(Rec) 8P
(Rec) 8P
Solder Position
Solder Position
Assembly-3: Precaution During Speaker Installation.
Route the speaker harness as shown below.
Speaker
Harness
Harness
Rib