Read Sony DSC-W320 (serv.man2) Service Manual online
DSC-W320_L2
1-6
1-9. DC MOTOR WORM A ASSY REPL ACING METHOD
Removal
1
1
Remove four screws, and remove the Rear Mirror Plate.
3
Peel off the FG Seal.
2
Remove the Naruto Gear Lubricated Assy and Warm B Lubricated Assy.
4
Remove two screws.
5
Remove the two soldering, and remove the DC Motor Worm A Assy.
2
Install the Naruto Gear Lubricated Assy and Warm B Lubricated Assy.
1
Solder the two locations.
2
Install the DC Motor Worm A Assy with two screws.
2
Put the FG Seal.
3
Install the Rear Mirror Pl ate with the four screws in the order o f nambers.
Installation
* Tightening torque = 0.049
± 0.01N • m (0.5 ± 0.1kgf • cm)
* Tightening torque = 0.049
± 0.01N • m (0.5 ± 0.1kgf • cm)
Screw
Screw
Screw
Screw
Rear Mirror Plate
Naruto Gear
Lubricated Assy
Lubricated Assy
Warm B
Lubricated Assy
Lubricated Assy
4
1
2
3
Screw
Screw
Screw
FG Seal
Screw
Screw
Screw
Rear Mirror Plate
Naruto Gear
Lubricated Assy
Lubricated Assy
Warm B
Lubricated Assy
Lubricated Assy
Solders
DC Motor Worm A Assy
Screw
Screw
FG Seal
Solders
DC Motor Worm A Assy
1-10. CAM TUBE BLOCK ASSY AND STRAIGHT TUBE LUBRICATED ASSY AND
1 GROUP FRAME REPLACING METHOD
5
Remove the Naruto Gear Lubricated Assy.
Removal
1
1
Remove four screws, and remove the Rear Mirror Plate.
2
Remove the 3 Group Frame.
3
Remove the 3 Group Spring.
4
Disconnect the Iris Flexible Board from connector of 2 Frame Assy.
Screw
Screw
Screw
Screw
Rear Mirror Plate
Iris Flexible Board
Flexible Board
of 2 Frame Assy
of 2 Frame Assy
3 Group Frame
3 Group
Spring
Spring
3 Group Frame
3 Group Spring
Warm B
Lubricated Assy
Lubricated Assy
The changed portions from
Ver. 1.4 are shown in blue.
Ver. 1.4 are shown in blue.
Ver. 1.5 2010.08
Click on the first or last page to see other DSC-W320 (serv.man2) service manuals if exist.