Read Sony DSC-TF1 (serv.man2) Service Manual online
DSC-TF1_ADJ
5-7
5-2-6. Super Near Focus Adjustment
Note:
Perform the Super Near Focus Adjustment after the Near Focus Adjustment.
1) Be sure to set 10 ± 1 cm distance between the chart and the tip of camera lens.
2) Check that the center of chart meets the center of shot image screen with the zoom
lens at TELE end and WIDE end respectively.
Color temperature = 5000 ± 300K
Be sure not to turn off the power during adjusting.
The adjustment finished normally.
O SuperNear Focus Station Passed
Please Key MENU Enter...
The adjustment is complete
Fig. 5-2-34
The adjustment is finished abnormally.
X SuperNear Focus NG !
Malfunction of Super Near
Focus adjustment.
In case of the Super Near
Focus adjustment is failed,
readjust from the Far Focus
and try to readjust the
Super Near Focus.
Focus adjustment.
In case of the Super Near
Focus adjustment is failed,
readjust from the Far Focus
and try to readjust the
Super Near Focus.
Fig. 5-2-35
Adjustment order
Set the camera to the adjustment mode.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in front of the Chart. (Fig. 5-2-33)
Press the control button “ (Key Del)”, then Near Focus Adjustment starts.
on the screen. (Fig. 5-2-34)
In case of the adjustment is finished normally,
the adjustment completion indication appears
the adjustment completion indication appears
Turn off the power to quit the adjustment mode.
(Fig. 5-2-35)
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
the following indication appears on the screen.
In this case, confirm the adjusting environment
and readjust.
In case of the Super Near Focus adjustment is
failed, readjust from the Far Focus adjustment and
try to readjust the Super Near Focus adjustment.
and readjust.
In case of the Super Near Focus adjustment is
failed, readjust from the Far Focus adjustment and
try to readjust the Super Near Focus adjustment.
Screen display
Chart
Camera
Equipment required: Chart
10 ± 1 cm
Fig. 5-2-33
5-2-7. Set Language Destination
Language Destination Setting:
Save “lang.txt” in the root directory of the microSD or
Save “lang.txt” in the root directory of the microSD or
Memory Stick Micro
being used.
The content of “lang.txt” is as follows:
Language Destination (for example: E37)
Product ID (10 characters) (refer to “5-3 PRODUCT ID LIST”)
Serial Number (7 characters)
Product ID (10 characters) (refer to “5-3 PRODUCT ID LIST”)
Serial Number (7 characters)
The following is an example of U2 Language Destination Setting for DSC-TF1 black camera.
U2
0080812934
0120243
0080812934
0120243
Especially Attention:
1) The enter key must be the end symbol of each row.
2) For the Product ID, refer to “5-3 PRODUCT ID LIST”.
3) The Serial Number must be 7 characters. It refer to the serial number of shipment.
1) The enter key must be the end symbol of each row.
2) For the Product ID, refer to “5-3 PRODUCT ID LIST”.
3) The Serial Number must be 7 characters. It refer to the serial number of shipment.
The adjustment is finished abnormally.
Read Language NG!
Malfunction of Set Language
Destination.
In case of the Set Language
Destination is failed, reset
the Language Destination.
Destination.
In case of the Set Language
Destination is failed, reset
the Language Destination.
Fig. 5-2-37
Setting order
Set the camera to the adjustment mode.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Press the Shutter button (Key S1), then Language Destination Setting starts.
this setting completion indication appears
on the screen. (Fig. 5-2-36)
on the screen. (Fig. 5-2-36)
In case of this setting is finished normally,
Turn off the power to quit the adjustment mode.
the following indication appears on the screen.
(Fig. 5-2-37)
(Fig. 5-2-37)
and retry settting.
In case of this setting is finished abnormally,
In this case, confirm the setting environment
Screen display
The setting finished normally.
Set LangDestination OK!
The setting is complete
Fig. 5-2-36
Note:
The screen above is an example.
Note:
The screen above is an example.
Set Lang Destination
NOT CORRECT Destination!!!
Malfunction of Set Language
Destination.
Check the content of
Destination.
Check the content of
“
lang.txt
”
, then execute the
Set Language Destination.
Fig. 5-2-38
Click on the first or last page to see other DSC-TF1 (serv.man2) service manuals if exist.