Read Sony DSC-TF1 (serv.man2) Service Manual online
DSC-TF1_ADJ
5-5
5-2-2. White Balance Adjustment
The White Balance Adjustment is as follows.
Small pattern box (PTB-1450) setting:
Color temperature = 3150 ± 50K
Luminance: LV12.3 ± 0.2
Color temperature = 3150 ± 50K
Luminance: LV12.3 ± 0.2
The adjustment finished normally.
O WB OK
O LensShading OK
OISgainDefault X 26 Y 24
O LensShading OK
OISgainDefault X 26 Y 24
The adjustment is complete
Fig. 5-2-19
The adjustment is finished abnormally.
X Cap WB NG
O LensShading OK
OISgainDefault X 26 Y 24
OISgainDefault X 26 Y 24
Malfunction of Capture WB
adjustment
adjustment
Fig. 5-2-20
X Pre WB NG
O LensShading OK
OISgainDefault X 26 Y 24
OISgainDefault X 26 Y 24
Malfunction of Preview WB
adjustment
adjustment
Fig. 5-2-21
X WB NG
O LensShading OK
OISgainDefault X 26 Y 24
OISgainDefault X 26 Y 24
Malfunction of all
adjustment
adjustment
Fig. 5-2-22
Adjustment order
Set the camera to the adjustment mode.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-2-18)
Press the control button “ z (Key OK)”, then White Balance Adjustment starts.
the adjustment completion indication appears
on the screen. (Fig. 5-2-19)
on the screen. (Fig. 5-2-19)
In case of the adjustment is finished normally,
Turn off the power to quit the adjustment mode.
the following indication appears on the screen.
(Fig. 5-2-20 to 5-2-22)
(Fig. 5-2-20 to 5-2-22)
In case of the adjustment is finished abnormally,
In this case, confirm the adjusting environment
and readjust.
and readjust.
Screen display
Equipment required: Small pattern box (PTB-1450)
Small pattern box
(PTB-1450)
(PTB-1450)
0.5 to 1.0 cm
Black cloth
Camera
Clear chart
Fig. 5-2-18
5-2-3. Zoom Adjustment
The Zoom Over Run/Focus Back Lash Adjustment order is as follows.
Perform the Zoom adjustment in the condition the camera stands up in the horizontal plane.
Adjusting in other conditions causes a malfunction of the zoom adjustment.
Perform the Zoom adjustment in the condition the camera stands up in the horizontal plane.
Adjusting in other conditions causes a malfunction of the zoom adjustment.
The adjustment finished normally.
O Zoom Station Passed
The adjustment is complete
Fig. 5-2-23
The adjustment is finished abnormally.
X Focus backlash NG
X Zoom Adjust NG
X Zoom Adjust NG
Malfunction of zoom
adjustment result
adjustment result
Fig. 5-2-24
X Focus backlash NG
Malfunction of zoom
adjustment focus section
adjustment focus section
Fig. 5-2-25
X Zoom Adjust NG
Malfunction of zoom
adjustment zoom section
adjustment zoom section
Fig. 5-2-26
Adjustment order
Screen display
Set the camera to the adjustment mode.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in the horizontal plane.
Press the control button “ V (Key Down)”, then Zoom Adjustment starts.
on the screen. (Fig. 5-2-23)
In case of the adjustment is finished normally,
the adjustment completion indication appears
the adjustment completion indication appears
Turn off the power to quit the adjustment mode.
the following indication appears on the screen.
In case of the adjustment is finished abnormally,
(Fig. 5-2-24 to 5-2-26)
In this case, confirm the adjusting environment
and readjust.
In this case, confirm the adjusting environment
and readjust.
Click on the first or last page to see other DSC-TF1 (serv.man2) service manuals if exist.