DSC-TF1 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 3

DSC-TF1_ADJ

5-3

1)  Download the firmware file “SDWH450C_[][][]ADJ.zip” from the TISS homepage.
 

Uncompress the “SDWH450C_[][][]ADJ.zip”, then confirm that it includes the following items.

• SDWH450C.bin

2)  Save the uncompressed file “SDWH450C.bin” in the root directory of the microSD or Memory Stick Micro after formatting it.
 

And also save the file of “lang.txt” in the root directory microSD or Memory Stick Micro when replacing Main board.

 

Refer to “5-2-7. Set Language Destination” (Page 5-7) for “lang.txt”.

  Saving it in other directories causes a malfunction of program.
  When formatting, perform on the PC, using the FAT. Do not format on the camera.
  (If the concealed file “MEMSTICK.IND” is still remained after formatting, delete it.)

3)  With the camera turned off, and insert the microSD or Memory Stick Micro with the “SDWH450C.bin” into the Memory card slot of the camera.

4)  Turn on the camera, and press the Mode button to set Still image mode ( ), turn off the camera again.

5)  While pressing the controll button “● (Key OK)”, press the ON/OFF (Power) button, then release when the Charge lamp turns on and the Cyber-

shot logo appears on the LCD display.

6)  The LCD display will turn white for a moment, and release the controll button “● (Key OK)” when the Cyber-shot logo appears on the LCD 

display again.

7)  After several seconds, the adjustment mode screen appears. (Fig. 5-1-5)

Key Up: MS/BP Adjust
Key OK: WB/ISO Adjust
Key Down: Zoom Adjust
Key Left: Far Focus Adjust
Key Right: Near Focus Adjst
Key Del: SuperNear Focus Adjst
Key S1: Set Lang Destination

Pressing the MENU button, the adjustment is completed and the initial screen for the adjustments appears.
To continue the adjustment, perform the operations mentioned from the next page.
When all adjustments are completed, press the ON/OFF (Power) button and remove the battery to finish the adjustment operations.