Read Sony DSC-T1 (serv.man2) Service Manual online
6-30
DSC-T1
1-5.
LCD SYSTEM ADJUSTMENT
Note:
When replacing the LCD unit, be careful to prevent damages caused
by static electricity.
by static electricity.
Switch setting:
LCD ON/OFF ........................................................................... ON
LCD ON/OFF ........................................................................... ON
1. Data Setting during LCD System Adjustments
Perform the following data setting before the LCD system
adjustments.
adjustments.
Note:
When the power is turned off, some data settings will be released.
So perform this data setting again when the power is turned off.
So perform this data setting again when the power is turned off.
Order Page Address Data
Procedure
1
00
01
01
Set the data.
2
80
70
01
Set the data.
After completing the LCD system adjustments, release the data
setting.
setting.
Order Page Address Data
Procedure
1
80
70
00
Set the data.
2
Save the data.
3
Wait for 2 sec.
4
00
01
00
Set the data.
2. LCD Initial Data Input (1)
Mode
PLAY (
)
Signal
Arbitrary
Adjustment Page
8F
Adjustment Address
20, 21, 23 to 2C
Adjusting method:
1)
1)
Select page: 00, address: 01, and set data: 01.
2)
Select page: 8F, and set the data in the following table.
3)
Save the data.
4)
Wait for 2sec.
5)
Select page: 00, address: 01, and set data: 00.
Address
20
21
23
24
25
26
27
28
29
2A
2B
2C
Data
89
B8
8C
A2
91
3F
41
80
80
80
80
45
Remark
Fixed data
Fixed data
VCO adj.
Fixed data
Bright adj.
Fixed data
Fixed data
White balance adj. (1)
White balance adj. (2)
White balance adj. (1)
White balance adj. (2)
Contrast adj.
Click on the first or last page to see other DSC-T1 (serv.man2) service manuals if exist.