Read Sony DSC-RX100M2 (serv.man2) Service Manual online
DSC-RX100M2_L2
1-15
13. Install the Naruto Gear.
14. Turn the Naruto Gear in the arrow direction to extend the Lens Barrel to the center of TELE and WIDE.
14. Turn the Naruto Gear in the arrow direction to extend the Lens Barrel to the center of TELE and WIDE.
15. Pull the Flexible Boards out of the Lens Barrel and fix the Flexible Boards with the Boss and the Ribs.
16. Turn the Naruto Gear in the arrow direction to return to the WIDE end.
16. Turn the Naruto Gear in the arrow direction to return to the WIDE end.
17. Install the LF-155 Flexible Boards.
18. Connect the Flexible Boards to the connectors.
18. Connect the Flexible Boards to the connectors.
19. Install the Rear Tube Mirror Block.
Rear Tube Mirror Block
LF-155 Flexible Board
Naruto Gear
Naruto Gear
Flexible
Boards
Boards
Boss
Rib
Rib
Rib
Naruto Gear
Hook
Boss
Connectors
Flexible
Boards
Boards
Rib
Rib
Rear Tube Mirror Block
20. Connect the Flexible Board (Focus) to the connector.
21. Install the FPC Retainer and a screw.
22. Install the Zoom Gear Assy (1560).
21. Install the FPC Retainer and a screw.
22. Install the Zoom Gear Assy (1560).
Zoom Gear Assy (1560)
Screw
23. Install the Sensor.
24. Install five screws and the Z Retainer.
24. Install five screws and the Z Retainer.
Screws
Screw
Z Retainer
Screw
Flexible Board (Focus)
Connector
FPC Retainer
Hook
Sensor
Rib
Boss
Rib
Click on the first or last page to see other DSC-RX100M2 (serv.man2) service manuals if exist.