Read Sony DSC-RX100M2 (serv.man2) Service Manual online
DSC-RX100M2_L2
1-12
1-9. LINEAR GUIDE TUBE (B) AND CAM TUBE REPLACING METHOD
Removal
1. Remove the five screws and the Z Retainer.
2. Remove the Sensor.
1. Remove the five screws and the Z Retainer.
2. Remove the Sensor.
Zoom Gear Assy (1560)
Screw
Rear Tube Mirror Block
Screws
Screw
Z Retainer
Screw
3. Remove the Zoom Gear Assy (1560).
4. Remove the FPC Retainer and the screw.
5. Disconnect the Flexible Board (Focus) from the connector.
4. Remove the FPC Retainer and the screw.
5. Disconnect the Flexible Board (Focus) from the connector.
6. Remove the Rear Tube Mirror Block.
7. Disconnect the Flexible Boards from the connectors and remove the LF-155 Flexible Board.
LF-155 Flexible Board
Flexible board (Focus)
Sensor
Connector
FPC Retainer
Hook
Hook
Boss
Be careful so that the Rear Tube
Mirror Block is not caught.
Connectors
Flexible
Boards
Solders
LF-155 Flexible Board
FG Retainer
Sensors
Hook
Rib
Boss
Rib
Installation
1. Install the two Sensors to the Zoom Gear Assy (1560), and then attach the FG Retainer.
2. Solder the Zoom Gear Assy (1560) to the LF-155 Flexible Board at two locations.
1. Install the two Sensors to the Zoom Gear Assy (1560), and then attach the FG Retainer.
2. Solder the Zoom Gear Assy (1560) to the LF-155 Flexible Board at two locations.
Screw
Zoom Gear Assy (1560)
3. Install the Zoom Gear Assy (1560).
4. Install the screw.
Zoom Gear Assy (1560)
Click on the first or last page to see other DSC-RX100M2 (serv.man2) service manuals if exist.