DSC-RX100M2 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 17

Read Sony DSC-RX100M2 (serv.man2) Service Manual online

DSC-RX100M2_L2
1-14
Linear Guide Tube (B)
Cam Tube
CAV No.
Linear Guide Tube (B)
Installation
1. While matching the marks of the Linear Guide Tube (B) and the Cam Tube, assemble these parts.
2. Set the     Mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
3. Install the 2 Group Frame Block Assy at a position where the      Mark of the Linear Guide Tube (B) matches CAV No. of 
    the 2 Group Frame Block Assy.
4. Install the 3 Group Frame Block Assy at a position where the      Mark of the Linear Guide Tube (B) matches the hole of the 
    3 Group Frame Block Assy.
5. Set the     Mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
6. Match the Mark of the Cam Tube with the concave portion of the 1 Group Frame Block Assy.
7. Install the Cam Tube and the 1 Group Frame Block Assy, and turn the Cam Tube.
2 Group Frame Block Assy
3 Group Frame Block Assy
1 Group Frame 
Block Assy
Cam Tube
Cam Tube
Cam Tube
Linear Guide Tube (B)
Cam Tube
Linear Guide Tube (B)
Mark
Mark
Mark
Concave
portion
Mark
Hole
8.
9.
10. Turn the Cam Tube counterclockwise to the maximum extent.
11.
12. Check that the five Helicoids are engaged with the grooves.
Cam Tube
Straight Tube (A) 
Block Assy
Stationary Tube
Near the
Naruto Gear
Concave
portion
CAV No.
Straight Tube (A) 
Block Assy
Match CAV No. inside the Straight Tube (A) Block Assy with the concave portion position of the 1 Group 
Frame Block Assy.
Push the Straight Tube (A) Block Assy in the arrow direction with the Cam Tube turned clockwise to the 
maximum extent.
While matching the Helicoid near the     Mark with the groove near the Naruto Gear of the Stationary 
Tube, assemble the Stationary Tube.
Helicoid
Mark
Page of 39
Display

Click on the first or last page to see other DSC-RX100M2 (serv.man2) service manuals if exist.