Read Sony DSC-KW1 / DSC-KW11 Service Manual online
4-17
DSC-KW1/KW11
The setting is finished normally.
Fig. 4-3-
32
The setting is complete.
Screen display
The setting is finished abnormally.
Fig. 4-3-
33
Malfunction of Set
Language Destination
result
Language Destination
result
Example:
Camera Start NG
Setting order
The Language Destination setting order is as follows.
Confirm the indication
on the screen.
Press the “Read” button, “PRODUCT CODE” and “SERIAL No.” will displayed on the screen.
Select the correspond language destination from the pull-down menu, input the “SERIAL No.”, then press the “Write” button.
*1 The “SERIAL No.” is written on the bottom of the camera.
Select the correspond language destination from the pull-down menu, input the “SERIAL No.”, then press the “Write” button.
*1 The “SERIAL No.” is written on the bottom of the camera.
*2 Once the Language Destination setting is finished, it cannot be reset.
The camera restarts and switches to the Mass
Storage connection automatically.
Storage connection automatically.
Disconnect the camera from the Micro USB
cable and perform the initial setting.
cable and perform the initial setting.
In case of the setting is finished normally,
the setting completion indication appears on
the screen. (Fig. 4-3-
the setting completion indication appears on
the screen. (Fig. 4-3-
32
)
In case of the setting is finished abnormally,
the following message appears on the screen.
(Fig. 4-3-
the following message appears on the screen.
(Fig. 4-3-
33
)
In this case, perform the setting again upon
the message.
the message.
Finished abnormally.
Finished normally.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Ver. 1.2 2014.11
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Click on the first or last page to see other DSC-KW1 / DSC-KW11 service manuals if exist.