Read Sony DSC-KW1 / DSC-KW11 Service Manual online
4-3
DSC-KW1/KW11
4-1-5. Setting the Adjustment Mode
1) Download the adjustment tool “ADJ_Tool_KW1_Ver[][][].zip”.
Uncompress the “ADJ_Tool_KW1_Ver[][][].zip”, then confirm that it includes the following items.
• EnableTest.txt
• DSC00001.JPG: Refer to “4-3-9. Display WB Check/Calibration”. (Page 4-15)
• DSC00002.JPG: Refer to “4-3-9. Display WB Check/Calibration”. (Page 4-15)
• DSC00002.JPG: Refer to “4-3-9. Display WB Check/Calibration”. (Page 4-15)
• USB Driver (Folder): Refer to “4-3-
10
. Set Language Destination”. (Page 4-16)
• Service Tool (Folder): Refer to “4-3-
10
. Set Language Destination”. (Page 4-16)
2) Save the uncompressed file “EnableTest.txt” in the root directory of the Memory Card after formatting the it.
Note:
Saving it in other directories causes a malfunction of program.
Save the Memory Card after confirming that the “EnableTest.txt” is empty.
Be sure to format the Memory Card on the camera.
If “EnableTest.txt” is still remained after the adjustment, delete it.
Save the Memory Card after confirming that the “EnableTest.txt” is empty.
Be sure to format the Memory Card on the camera.
If “EnableTest.txt” is still remained after the adjustment, delete it.
3) With the camera turned off, insert the Memory Card with the “EnableTest.txt” into the Memory card slot of the camera.
4) Press the “ON/OFF (Power)” button while turning the “Shutter” button.
5) After a few seconds, the Adjustment mode screen will appear on the screen. (Fig. 4-1-4)
6) Touch the Set key, the initial screen for the adjustment mode will appear. (Fig. 4-1-5)
Ver:X.XXXX
TupFW Ver:1007
MB/LCD:
OK
FuncCheck:
OK
AF Clbt:
OK
OB Clbt:
OK
WB/Agc:
OK
Light DPC:
OK
Dark DPC:
OK
Boot Type:
OK
UsbMode:
OK
LensOpt:
OK
AF Lamp:
OK
WIFI:
OK
NFC:
OK
TUP_FW:
OK
FlashWB:
NG
No Box No.
Dso ID:XXXXXXXX
Index : 01
⇨
X.XXXX
A0E6V3000033
Index : 01
CLBT INFO
V
V
V
MB/LCD
OB CLBT
WB/AGC
(BLACK)
(LV10)
Fig. 4-1-4
Fig. 4-1-5
4-1-6. Enabling the Adjustment
The item that has been adjusted may be disabled to be readjusted.
If the readjustment is required, or when replacing Lens Assy, CMOS Board Assy, Main Board Assy and TP OLED Block Assy, it is necessary
to enable the adjustment upon the following procedure.
If the readjustment is required, or when replacing Lens Assy, CMOS Board Assy, Main Board Assy and TP OLED Block Assy, it is necessary
to enable the adjustment upon the following procedure.
1) Touch the Up, Down, Right or Left key to choose an adjustment item.
2) Press the “Shutter” button.
3) Touch the Left key.
(Disable
(Disable
“000001”
→ Disable “000000”) (Fig. 4-1-６)
Example: For MB/LCD
Disable
Run LCD
Video
Only LCD
000001
000000
000000
000000
⇨
Disable
Run LCD
Video
Only LCD
000000
000000
000000
000000
Disabled
Enabled
Fig. 4-1-6
Ver. 1.2 2014.11
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Click on the first or last page to see other DSC-KW1 / DSC-KW11 service manuals if exist.