Read Sony DSC-KW1 / DSC-KW11 Service Manual online
DSC-KW1/KW11
3-6
(4) Reassembling the Top Cover Assy
1. Warm up the Lens Ring block.
2. Put a clean cleaning cloth inside of the top cover, and press the
2. Put a clean cleaning cloth inside of the top cover, and press the
Lens Ring Block from the inside, then remove it.
Drier
Cleaning cloth
(P/N :J-6082-636-A
CCD Cleaning Cloth)
(P/N :J-6082-636-A
CCD Cleaning Cloth)
Lens Ring Block
3. Install the Lens Assy to the Top Cover .
Top Cover Assy
Lens Assy
4. Confirm the state of Adhesive sheets and change it if there is not
any adhesive force of the Adhesive sheets.
Lens Ring Block
Adhesive sheet 1
Adhesive sheet 2
Top Cover
5. Orientation the Lens Rubber and attach it.
6. Confirm that there are not dirt and material inside of the Lens
6. Confirm that there are not dirt and material inside of the Lens
Ring Block.
7. Attach the Lens Ring Block.
Lens Ring Block
Lens Rubber
Section View
Outside
Inside
Click on the first or last page to see other DSC-KW1 / DSC-KW11 service manuals if exist.