Read Sony DSC-KW1 / DSC-KW11 Service Manual online
DSC-KW1/KW11
3-4
3-3-2. Top Cover Section
• Disassembly order
No.
Part
Item
Note
1
NFC Flexible Board
Adhesive sheet
2
Display Bracket Assy
3
TP OLED Block Assy
(This order No. 3 can be
skipped if no need to replace it
with new part.)
skipped if no need to replace it
with new part.)
Adhesive sheet
As the TP-OLED Block Assy may be broken by slight pressure,
remove it by paying scrupulous attention.
remove it by paying scrupulous attention.
4
Lens Pink Cover/Lens Gold Cover
#S3 x 2
5
Lens Bottom Cover Assy
6
Top Cover Assy
7
Lens Holder Assy
#S7 x 2
8
CMOS Board Assy
#S7 x 1
Connector x 2
Connector x 2
9
Lens Assy
#S7 x 2
#S7
#S3
#S7
#S7
2
7
8
9
6
3
4
5
1
(Connector)
(Connector)
(Adhesive sheet)
(Adhesive sheet)
Procedure:
1 .Apply alcohol fully to all the periphery of the TP-OLED Block Assy.
2. Heat all the periphery of the TP-OLED Block Assy with Drier or etc..
3. To weaken the adhesiveness as much as possible,
soften the Adhesive sheet by repeating steps 1 and 2.
4. Push the TP-OLED Block Assy from the inside by slight power. If it does not
loosen, repeat steps 1 and 2.
5. After the TP-OLED Block Assy starts to loosen, apply alcohol more.
Push slightly slowly the TP-OLED Block Assy from the inside by slight power
again, and peel off the Adhesive sheet.
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2014.10
Click on the first or last page to see other DSC-KW1 / DSC-KW11 service manuals if exist.