Read Sony KDL-40X4500 / KDL-46X4500 / KDL-55X4500 (serv.man2) Service Manual online
SERVICE MANUAL
EG1H
CHASSIS
LCD Digital Colour TV
RMF-GD001
KDL-40X4500/46X4500/55X4500
MODEL
KDL-40X4500
KDL-46X4500
KDL-55X4500
KDL-46X4500
KDL-55X4500
COMMANDER
RMF-GD001
RMF-GD001
RMF-GD001
DEST.
Hong Kong
Hong Kong
Hong Kong
MODEL
COMMANDER
DEST.
KDL-40/46/55X4500 (HK) 2
SPECIFICATIONS
Model name
KDL-40X4500
KDL-46X4500
KDL-55X4500
System
Analogue: B/G, I, D/K, M
Digital: GB20600-2006
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58,
Digital: GB20600-2006
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58,
NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Analogue: B/G: VHF: E2~E12/UHF: E21~E69/CATV: S01~S03, S1~S41
I: UHF: B21~B69/CATV: S01~S03, S1~S41
D/K: VHF: C1~C12, R1~R12/UHF: C13~C57, R21~R60/
D/K: VHF: C1~C12, R1~R12/UHF: C13~C57, R21~R60/
CATV: S01~S03, S1~S41, Z1~Z39
M: VHF: A2~A13/UHF: A14~A79/CATV: A-8~A-2, A~W+4,
W+6~W+84
Digital: GB20600-2006
Input/Output jacks
1, 2
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
B
/C
B
: 0.7 Vp-p, 75 ohms/
P
R
/C
R
: 0.7 Vp-p, 75 ohms
HDMI IN1, 2, 3, 4
Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input (minijack) (HDMI IN 1 only)
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input (minijack) (HDMI IN 1 only)
PC Input
Video output (phono jack)
Audio output (phono jacks)
PC audio input (minijack)
USB port
Headphonesjack
LAN
10BASE-T/100BASE-TX connector (Depending on the operating environment of
the network, connection speed may differ. 10BASE-T/100BASE-TX communication
rate and communication quality are not guaranteed for this TV.)
the network, connection speed may differ. 10BASE-T/100BASE-TX communication
rate and communication quality are not guaranteed for this TV.)
Power and others
Screen size (measured diagonally)
40 inches
(Approx. 101.6 cm)
(Approx. 101.6 cm)
46 inches
(Approx. 116.8 cm)
55 inches
(Approx. 138.8 cm)
(Approx. 138.8 cm)
Power
consumption
consumption
in “Home”/
“Standard” mode
“Standard” mode
210 W
270 W
370 W
in “Shop”/“Vivid”
mode
mode
230 W
350 W
380 W
Standby power consumption*
0.3W (19 W when
“Quick Start” is set to
“On”)
“Quick Start” is set to
“On”)
0.6 W (20 W when
“Quick Start” is set to
“On”)
“Quick Start” is set to
“On”)
0.7 W (22 W when
“Quick Start” is set to
“On”)
“Quick Start” is set to
“On”)
LCD (Liquid Crystal Display) Panel
TV system
Colour/video system
Channel coverage
Panel system
Sound output
10 W+ 10 W, 12 W + 12 W (Woofer)
Antenna/cable
75 ohmexternal terminal for VHF/UHF
1
S video input (4-pin mini DIN)
1, 2, 3
Video input (phono jacks)
1, 2, 3
Audio input (phono jacks)
DIGITAL AUDIO OUT
(OPTICAL)
(OPTICAL)
Digital optical jack
PC IN (RGB)
PC Input (D-sub 15-pin)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
DMPORT
DIGITAL MEDIA PORT
Power requirements
220 V – 240 V AC, 50 Hz
Display resolution
1,920 dots (horizontal)
× 1,080 lines (vertical)
KDL-40/46/55X4500 (HK) 3
* Specified standby power is reached after the TV finishes necessary internal processes.
Design and specifications are subject to change without notice.
PC input signal reference chart for
PC and HDMI IN 1, 2, 3, 4
* 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This
affects the “Video Settings” menu and “Screen” menu settings.
To view PC contents, set “Game/Text Mode” to “On”, “Wide Mode” to “Full”, and “Display Area” to “Full
Pixel”.
To view PC contents, set “Game/Text Mode” to “On”, “Wide Mode” to “Full”, and “Display Area” to “Full
Pixel”.
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical
frequency (boldfaced).
Dimensions
(Approx.)
(w
(Approx.)
(w
× h × d)
withTable-Top
Stand
Stand
1,128
× 655 × 279 mm
without Table-Top
Stand
Stand
1,128
× 603 × 125 mm
Mass
(Approx.)
(Approx.)
withTable-Top
Stand
Stand
27.0 kg
withoutTable-Top
Stand
Stand
23.5 kg
Optional
accessories
accessories
Wall-Mount
Bracket
Bracket
SU-WL500/WL50B
Colour Variation
Unit
Unit
CRU-40SG11
Resolution
Horizontal
frequency (kHz)
frequency (kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
Signals
Horizontal
(Pixel)
(Pixel)
×
Vertical
(Line)
(Line)
VGA
640
×
480
31.5
60
VGA
640
×
480
37.5
75
VESA
720
×
400
31.5
70
VGA-T
SVGA
800
×
600
37.9
60
VESA Guidelines
800
×
600
46.9
75
VESA
XGA
1024
×
768
48.4
60
VESA Guidelines
1024
×
768
56.5
70
VESA
1024
×
768
60.0
75
VESA
WXGA
1280
×
768
47.4
60
VESA
1280
×
768
47.8
60
VESA
1280
×
768
60.3
75
1360
×
768
47.7
60
VESA
SXGA
1280
×
1024
64.0
60
VESA
HDTV
1920
×
1080
67.5
60
CEA-861*
Model name
KDL-40X4500
KDL-46X4500
KDL-55X4500
1,486
× 855 × 356 mm
1,486
× 803 × 147 mm
54.0 kg
47.5 kg
CRU-55SG11
1,259
× 737 × 315 mm
1,259
× 685 × 144 mm
38.0 kg
33.0 kg
CRU-46SG11
KDL-40/46/55X4500 (HK) 4
CAUTION
These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
!
SAFETY-RELATED COMPONENT
WARNING!!
Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.
appear as shown in this manual or in supplements
published by Sony.
WARNINGS AND CAUTIONS
SAFETY-RELATED COMPONENT
WARNING
It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
NOTE: Do not modify the original design without obtaining
written permission from the manufacturer or you will
void the original parts and labor guarantee.
void the original parts and labor guarantee.
USE CAUTION WHEN HANDLING THE LCD PANEL
When repairing the LCD panel, be sure you are grounded by
using a wrist band.
using a wrist band.
When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
electric shock.
2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of
3) Do not leave the module in high temperatures or in areas of
high humidity for an extended period of time.
4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within
5) Avoid contact with water. It may cause a short circuit within
the module.
6) Disconnect the AC power when replacing the backlight (CCFL)
or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)
(High voltage occurs at the inverter circuit at 650Vrms.)
7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter
8) Use care when handling the wires or connectors of the inverter
circuit. Damaging the wires may cause a short.
9) Protect the panel from ESD to avoid damaging the electronic
circuit (C-MOS).
