Read Sony DSC-H1 (serv.man3) Service Manual online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver 1.1 2005. 09
LEVEL
1
Link
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
Link
Sony EMCS Co.
2005I1600-1
©2005.9
Published by DI Technical Support Department
9-876-880-41
DSC-H1
DIGITAL STILL CAMERA
DSC-H1
DSC-H1
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Japanese Model
Korea Model
Tourist Model
— 2 —
DSC-H1
SPECIFICATIONS
Camera
[System]
Image device
7.19 mm (1/2.5 type) color
CCD, Primary color filter
CCD, Primary color filter
Total pixel number of camera
Approx. 5 255 000 pixels
Effective pixel number of camera
Approx. 5 127 000 pixels
Lens
12 zoom lens
f = 6.0 - 72.0 mm (36 - 432 mm
when converted to a 35 mm still
camera)
F2.8 - 3.7
f = 6.0 - 72.0 mm (36 - 432 mm
when converted to a 35 mm still
camera)
F2.8 - 3.7
Exposure control Automatic exposure, Shutter
speed priority, Aperture
priority, Manual exposure,
Scene Selection (7 modes)
priority, Manual exposure,
Scene Selection (7 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent,
Flash, One push
Fluorescent, Incandescent,
Flash, One push
File format (DCF compliant)
Still images: Exif Ver. 2.2
JPEG compliant, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)
JPEG compliant, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)
Recording media Internal memory 32 MB
“Memory Stick”
Flash
Recommended distance (ISO
set to Auto): 0.3 m to 6.8 m
(11 26/32 inches to 22 feet
3 23/32 inches) (W)/0.9 m to
5.2 m (2 feet 11 14/32 inches to
17 feet 23/32 inches) (T)
set to Auto): 0.3 m to 6.8 m
(11 26/32 inches to 22 feet
3 23/32 inches) (W)/0.9 m to
5.2 m (2 feet 11 14/32 inches to
17 feet 23/32 inches) (T)
Viewfinder
Electric viewfinder (color)
[Input and Output connectors]
A/V OUT (MONO) jack (Monaural)
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
,
unbalanced, sync negative
Audio: 327 mV (at a 47 k
load)
Output impedance 2.2 k
Audio: 327 mV (at a 47 k
load)
Output impedance 2.2 k
USB jack
mini-B
USB communication
Hi-Speed USB (USB 2.0
compliant)
compliant)
[LCD screen]
LCD panel
6.2 cm (2.5 type) TFT drive
Total number of dots
115 200 (480x240) dots
[Finder]
LCD panel
0.75 cm (0.3 type) TFT drive
Total number of dots
115 200 (480x240) dots
[Power, general]
Power
HR 15/51:HR6 (size AA)
Nickel-Metal Hydride batteries
(2), 2.4 V
ZR6 (size AA) Oxy Nickel
Primary Battery (2, not
supplied), 3 V
AC-LS5K AC Adaptor (not
supplied), 4.2 V
Nickel-Metal Hydride batteries
(2), 2.4 V
ZR6 (size AA) Oxy Nickel
Primary Battery (2, not
supplied), 3 V
AC-LS5K AC Adaptor (not
supplied), 4.2 V
Power consumption
(during shooting with the LCD screen)
(during shooting with the LCD screen)
1.8 W
Operating temperature
0
°
C to +40
°
C (+32
°
F to
+104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to
+140
°
F)
Dimensions
108x81.4x91.2 mm
(4 1/4x 31/4x 35/8 inches)
(W/H/D, excluding maximum
protrusions)
(4 1/4x 31/4x 35/8 inches)
(W/H/D, excluding maximum
protrusions)
Mass
Approx. 590.8 g (1 lb 20.8 oz)
(including two batterries,
shoulder strap, adaptor ring,
lens hood, lens cap, etc.)
(including two batterries,
shoulder strap, adaptor ring,
lens hood, lens cap, etc.)
Microphone
Electret condenser microphone
Speaker
Dynamic speaker
Exif Print
Compatible
PRINT Image Matching III
Compatible
PictBridge
Compatible
BC-CS2A/CS2B Ni-MH battery charger
Power requirements
AC 100 to 240 V, 50/60 Hz,
3 W
3 W
Output voltage
AA: DC 1.4V 400 mAx2
AAA: DC 1.4 V 160 mAx2
AAA: DC 1.4 V 160 mAx2
Operating temperature
0
°
C to +40
°
C (+32
°
F to
+104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to
+140
°
F)
Dimensions
Approx. 71x30x91 mm
(2 7/8x 13/16x 35/8 inches)
(W/H/D)
(2 7/8x 13/16x 35/8 inches)
(W/H/D)
Mass
Approx. 90 g (3 oz)
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DSC-H1
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
— 4 —
DSC-H1
Checking supplied accessories.
Make sure that the following accessories are supplied with your camcorder.
Other accessories
2-629-893-01 INSTRUCTION (READ THIS FIRST) (JAPANESE)(J)
2-629-893-11 INSTRUCTION (READ THIS FIRST)(ENGLISH)
2-629-893-11 INSTRUCTION (READ THIS FIRST)(ENGLISH)
(US,CND,AEP,UK,E,HK,AUS,JE)
2-629-893-21 INSTRUCTION (READ THIS FIRST) (FRENCH/ITALIAN)
(CND,AEP)
2-629-893-31 INSTRUCTION (READ THIS FIRST)
(SPANISH/PORTUGUESE)(AEP,E,JE)
2-629-893-41 INSTRUCTION (READ THIS FIRST) (GERMAN/DUTCH)
(AEP)
2-629-893-51 INSTRUCTION (READ THIS FIRST)
(TRADITIONAL CHINESE/SIMPLIEIED CHINESE)(E,HK,JE,CH)
2-629-893-61 INSTRUCTION (READ THIS FIRST) (RUSSIAN/SWEDISH)
(AEP)
2-629-893-71 INSTRUCTION (READ THIS FIRST) (ARABIC/PERSIAN)(E)
2-629-893-81 INSTRUCTION (READ THIS FIRST) (KOREAN)(KR,JE)
2-629-893-91 INSTRUCTION (READ THIS FIRST) (POLISH/CZECH)
2-629-893-81 INSTRUCTION (READ THIS FIRST) (KOREAN)(KR,JE)
2-629-893-91 INSTRUCTION (READ THIS FIRST) (POLISH/CZECH)
(AEP)
2-629-894-11 INSTRUCTION (READ THIS FIRST)
(HUNGARIAN/SLOVAK)(AEP)
2-629-895-01 INSTRUCTION (USER'S GUIDE) (JAPANESE)(J)
2-629-895-11 INSTRUCTION (USER'S GUIDE) (ENGLISH)
2-629-895-11 INSTRUCTION (USER'S GUIDE) (ENGLISH)
(US,CND,AEP,UK,E,HK,AUS,JE)
2-629-895-21 INSTRUCTION (USER'S GUIDE) (FRENCH/ITALIAN)
(CND,AEP)
2-629-895-31 INSTRUCTION (USER'S GUIDE)
(SPANISH/PORTUGUESE)(AEP,E,JE)
2-629-895-41 INSTRUCTION (USER'S GUIDE) (GERMAN/DUTCH)(AEP)
2-629-895-51 INSTRUCTION (USER'S GUIDE)
(TRADITIONAL CHINESE/SIMPLIEIED CHINESE)(E,HK,JE,CH)
2-629-895-61 INSTRUCTION (USER'S GUIDE) (RUSSIAN/SWEDISH)
(AEP)
2-629-895-71 INSTRUCTION (USER'S GUIDE) (ARABIC/PERSIAN)(E)
2-629-895-81 INSTRUCTION (USER'S GUIDE) (KOREAN)(KR)
2-629-895-91 INSTRUCTION (USER'S GUIDE) (POLISH/CZECH)(AEP)
2-629-895-81 INSTRUCTION (USER'S GUIDE) (KOREAN)(KR)
2-629-895-91 INSTRUCTION (USER'S GUIDE) (POLISH/CZECH)(AEP)
2-629-943-11 INSTRUCTION (USER'S GUIDE) (HUNGARIAN/SLOVAK)
(AEP)
• Abbreviation
CND : Canadian model
HK
HK
: Hong Kong model
AUS : Australian model
CH
CH
: Chinese model
KR
: Korea model
JE
: Tourist model
J
: Japanese model
BATTERY CHARGER
(BC-CS2A/CS2B)(US,CND,J) (1)
1-479-378-11
BATTERY CHARGER
(BC-CS2A/CS2B)
(AEP,UK,E,AUS,HK,JE) (1)
1-479-378-21
BATTERY CHARGER
(BC-CS2A/CS2B)(KR,CH)(1)
1-479-378-31
(BC-CS2A/CS2B)(US,CND,J) (1)
1-479-378-11
BATTERY CHARGER
(BC-CS2A/CS2B)
(AEP,UK,E,AUS,HK,JE) (1)
1-479-378-21
BATTERY CHARGER
(BC-CS2A/CS2B)(KR,CH)(1)
1-479-378-31
CORD, POWER (1)
(US,CND)
1-790-107-42
CORD, POWER (1)
(AEP,E)
1-823-946-12
CORD, POWER (1)
(AUS)
1-827-945-11
POWER-SUPPLY CORD (1)
(KR)
1-776-985-11
CORD, POWER (1)
(UK,HK)
1-783-374-11
CORD, POWER (1)
(CH)
1-782-476-51
CORD, POWER (1)
(JE,J)
1-790-732-12
(US,CND)
1-790-107-42
CORD, POWER (1)
(AEP,E)
1-823-946-12
CORD, POWER (1)
(AUS)
1-827-945-11
POWER-SUPPLY CORD (1)
(KR)
1-776-985-11
CORD, POWER (1)
(UK,HK)
1-783-374-11
CORD, POWER (1)
(CH)
1-782-476-51
CORD, POWER (1)
(JE,J)
1-790-732-12
CASE, BATTERY CARRYING (1)
3-074-757-01
3-074-757-01
CORD WITH CONNECTOR (1)
(USB 5P)
1-827-038-11
(USB 5P)
1-827-038-11
CORD, CONNECTION (1)
1-824-519-11
1-824-519-11
BELT, SHOULDER (1)
2-629-892-01
2-629-892-01
HOOD, LENS (1)
2-629-860-01
2-629-860-01
RING, ATTACHMENT (1)
2-629-861-01
2-629-861-01
CAP ASSY, LENS (1)
X-2055-960-1
STRING, CAP
3-979-194-31
X-2055-960-1
STRING, CAP
3-979-194-31
C-S APPLI SOFT V1.6 (1)
2-583-853-01
2-583-853-01
ADAPTOR, CONVERSION 2P (1)
(JE,E)
1-573-856-12
(JE,E)
1-573-856-12
ADAPTOR, CONVERSION 2P (1)
(E)
1-569-008-21
(E)
1-569-008-21
Ver 1.1 2005. 09