DSC-H1 (serv.man12) - Sony Digital Camera Service Manual (repair manual)

dsc-h1 (serv.man12) service manual
Model
DSC-H1 (serv.man12)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
138.47 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / CORRECTION-1 ADJUSTMENTS
File
dsc-h1-sm12.pdf
Date

Read Sony DSC-H1 (serv.man12) Service Manual online

Auto-ADJ
SERVICE MANUAL
DSC-H1
Ver 1.1  2005.11
Sony EMCS Co.
9-876-880-95
2005K0500-1
© 2005.11
Published by DI Technical Support Department
CORRECTION-1
We will inform you that there are printing errors
in the service manual previously issued.
• Correction of the Before starting adjustment
• Correction of the Table 6-1-1
• Correction of the Service tool
DSC-H1
— 2 —
DSC-H1
!
 : Points deleted portion.
SECTION  6
ADJUSTMENTS
Before starting adjustment
(Service Manual Page 6-1)
(The same model of the same destination)
(Machine to be repaired)
PC
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked.)
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 when replacing board.
PC
Procedure 2
When the data cannot be saved due to defective flash memory, or when the flash memory cannot be removed or
installed, save the data from the same model of the same destination, and download it.
PC
Save the EVR data
to a personal computer.
Download the saved
data to a machine.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced.  Download the saved data after a board
is replaced.
(Machine after a board is replaced)
(Machine before starting repair)
Download the data.
Save the data.
(Machine to be repaired)
^
— 3 —
DSC-H1
&
 : Points added portion.
+
Precaution on Replacing the SY-127 board
The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
Perform “VIDEO OUT Default Data Check” mentioned below, and also the adjustment items necessary after SY Board
replacement.
VIDEO OUT Default Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setteing
because of broadcast system (NTSC/PAL).
When the data has changed because of board replaceing etc, check the default data of VIDEO OUT if destination code is
right. If not, rewrite to the right value.
VIDEO OUT Default Data
Page
Address
Data
NTSC
PAL
4F
8D
00
01
4F
A2
00
01
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click 
[Save]
 on the SEUS screen.
6) Wait for more than 3 sec.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.
— 4 —
DSC-H1
!
 : Points deleted portion.
@
1-1. Adjusting items when replacing main parts and boards
(Service Manual Page 6-3)
When replacing main parts and boards, adjust the items indicated by z  in the following table.
Note 1:
The automatic Adjustment Program does not support the “Initialization of data” and “Wide Limit Adjustment”. Perform them
manually.
Note 2:
Use the AWB Adjustment Program (H1AwbAdjustment.exe).
Note 3:
When replacing the SY-127 board, erase the data in internal memory of the board before replacement.
Note 4:
When replacing the SY-127 board or the IC381 on the SY-127 board, execute formatting and initialize the internal memory after
replacement.
Table 6-1-1
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
Back light unit
LCD unit
(AF illumination LED)
(CCD imager)
(T
iming gen., CCD signal process)
(EVF back light)
(Camera DSP)
(32M 
AND flash) (Note 4)
(LCD/EVF dri
v
er)
(V
ideo amp.)
(PITCH, Y
A
sensor)
LCD901
LED901
LCD902
D001
IC101
IC101
D001
IC301
IC381
IC601
IC802
SE401, 402
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE) (Note 3, 4)
(COMPLETE)
Lens block
Flash unit
LCD block
LCD block
EVF block
AF-102 board
CD-576 board
CH-169 board
EV
-016 board
SY
-127 board
SY
-127 board
SY
-127 board
SY
-127 board
SW
-447 board
AF-102 board
CD-576 board
CH-169 board
EV
-016 board
SY
-127 board
SW
-447 board
(Note 1)
Initialization of data
z
VIDEO adjustment
Video output level adj.
z
z
z
(Note 1)
Wide limit adj.
z
z
CAMERA adjustment 1 Flange back adj.
z
z
z
z
CAMERA adjustment 2 Flange back check
z
z
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z
z z
z z
z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
Strobe adj.
Auto focus illumination check
HALL sensor gain adj.
Angular velocity sensor sensitivity adj.
V-COM adj.
White Balance adj.
EVF adjustment
White Balance adj.
z
z z
z
z z
z
z
z
z
CAMERA adjustment 6
z
z
z
z
z
LCD adjustment
z
z
z
z
z
z
z
z
z
z
z
z
z
CAMERA adjustment 5
z
z
z
z
z
CAMERA adjustment 4
CAMERA adjustment 3
z
z
z
Page of 5
Display

Download Sony DSC-H1 (serv.man12) Service Manual (Repair Manual)

Here you can read online and download Sony DSC-H1 (serv.man12) Service Manual in PDF. DSC-H1 (serv.man12) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-H1 (serv.man12) Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.