DSC-H100, DSC-H200 - Sony Digital Camera Service Manual (repair manual)

dsc-h100, dsc-h200 service manual
Model
DSC-H100 DSC-H200
Pages
17
Size
3.19 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
dsc-h100-dsc-h200.pdf
Date

Read Sony DSC-H100 / DSC-H200 Service Manual online

DSC-H100/H200
Sony Corporation
SERVICE MANUAL
Revision History
SERVICE  NOTE (Check the following note before the service.)
983471312.pdf
2013E08-1
  © 2013.05
Published by Sony Techno Create Corporation
Ver. 1.1  2013.05
DIGITAL STILL CAMERA
9-834-713-12
US Model
Canadian Model
AEP Model
UK Model
Russian Model
E Model
Australian Model
Chinese Model
Brazilian Model
DSC-H100/H200
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2012.12
Official Release
1.1
2013.05
Revised-1
(A1 13-007)
•  Addition of notes in REPAIR PARTS LIST.
   Page 
2-4
2-5
Yes
Internal memory
ON BOARD
Internal memory
ON BOARD
1-1.  METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
1-2.  DEDICATED A/V CABLE (OPTIONAL ACCESSORY)
1-3. REGARDING FUSE
1-4.  PRECAUTION ON REPLACING THE LENS BLOCK ASSY
Note: This manual contains information of the DSC-H100 Service Manual (9-834-694-[][]) and additional DSC-H200 information.
The components identified 
by mark 
0 or dotted line with 
mark 
0 are critical for safety.
Replace only with part number 
specified.
Les composants identifiés par 
une marque 
0 sont critiques 
pour la sécurité.
Ne les remplacer que par une 
pièce portant le numéro spécifié.
Photo: DSC-H100
Revised-1
Replace the previously issued
SERVICE MANUAL 9-834-713-11
with this Manual.
DSC-H100/H200
– 2 –
SPECIFICATIONS
Camera 
[System] 
Image device: 7.75 mm (1/2.3 type)
 
color CCD, Primary color filter
Total pixel number of camera:
 
Approx. 16.4 Megapixels
Effective pixel number of camera:
 
Approx. 16.1 Megapixels
Lens: 21× zoom lens
 
f = 4.5 mm – 94.5 mm (25 mm –
 
525 mm (35 mm film equivalent))
 
F3.1 (W) – F5.8 (T)
SteadyShot: Optical
Exposure control: Automatic exposure,
 
Manual Exposure, Scene Selection
 (11 
modes)
White balance: Automatic, Daylight,
 
Cloudy, Fluorescent 1/2/3,
 
Incandescent, Flash, One Push
Recording interval for Burst mode:
 
Approx. 1.0 second
File format:
 
Still images: JPEG (DCF, Exif,
 
MPF Baseline) compliant, DPOF
 compatible
 Movies: 
MPEG-4 
AVC/H.264
Recording media: Internal Memory
 
(Approx. 55 MB), “Memory Stick
 
Duo” media, “Memory Stick
 
Micro” media, SD cards, microSD
 memory 
cards
Flash: Flash range (ISO sensitivity
 
(Recommended Exposure Index)
 set 
to 
Auto):
 
Approx. 0.5 m to 6.8 m (W) (1 ft.
 
7 3/4 inches to 22 ft. 3 3/4 inches)
 
Approx. 0.5 m to 3.7 m (T) (1 ft.
 
7 3/4 inches to 12 ft. 1 3/4 inches)
[Input and Output connectors]
USB / A/V OUT jack:
 Video 
output
 Audio 
output
 USB 
communication
USB communication: Hi-Speed USB
 (USB 
2.0)
[Screen]
LCD screen:
 
7.5 cm (3.0 type) TFT drive
Total number of dots:
 
460 800 dots
[Power, general]
Power: LR6 (size AA) alkaline
 
batteries (4), 6 V
 
HR15/51: HR6 (size AA) Nickel-
 
Metal Hydride batteries (4) (sold
 separately), 
4.8 
V
 ZR6 
(size 
AA)
Power consumption (during shooting):
 1.4 
W
Operating temperature:
 
0°C to 40°C (32°F to 104°F)
Storage temperature:
 
–20°C to +60°C (–4°F to +140°F)
Dimensions (CIPA compliant):
 
122.9 mm × 83.2 mm × 81.3 mm
 
(4 7/8 inches × 3 3/8 inches ×
 
3 1/4 inches)
 (W/H/D)
Mass (CIPA compliant) (including four
 
batteries and “Memory Stick Duo”
 media):
 
Approx. 515 g (1 lb 2.2 oz)
Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III:
 Compatible
Design and specifications are subject to
change without notice.
Model information table 
 
Model
DSC-H100
DSC-H200
Destination
E, BR
AEP, E, AUS
US, CND, E, BR
AEP, UK, RU, E, AUS, CH
Color system
NTSC
PAL
NTSC
PAL
GPS
• Abbreviation
  AUS   : Australian model
  BR  
: Brazilian model
  CH  
: Chinese model
  CND   : Canadian model
  RU  
: Russian model
SPECIFICATIONS
Camera 
[System] 
Image device: 7.76 mm (1/2.3 type)
 
CCD, Primary color filter
Total pixel:
 
Approx. 20.4 Megapixels
Effective pixel:
 
Approx. 20.1 Megapixels
Lens: 26× zoom lens
 
f = 4.0 mm – 104.0 mm (22.3 mm
 
– 580 mm (35 mm film
 equivalent))
 
F3.1 (W) – F5.9 (T)
 
While shooting movies (16:9):
 
28 mm – 748 mm
 
While shooting movies (4:3):
 
22.3 mm – 580 mm
SteadyShot: Optical
Exposure control: Automatic exposure,
 
Manual Exposure, Scene Selection
White balance: Automatic, Daylight,
 
Cloudy, Fluorescent 1/2/3,
 
Incandescent, Flash, One Push
Burst shooting (when shooting with the
 
largest pixel number):
 
Approx. 0.8 images/second (up to
 100 
images)
File format:
 
Still images: JPEG (DCF, Exif,
 
MPF Baseline) compliant, DPOF
 compatible
 Movies: 
MPEG-4 
AVC/H.264
Recording media: Internal Memory
 
(Approx. 55 MB), “Memory Stick
 
Duo” media, “Memory Stick
 
Micro” media, SD cards, microSD
 memory 
cards
Flash: Flash range (ISO sensitivity
 
(Recommended Exposure Index)
 set 
to 
Auto):
 
Approx. 0.4 m to 6.8 m (1 ft. 1/3
 
inches to 22 ft. 5 2/5 inches) (W)
 
Approx. 1.5 m to 3.6 m (5 ft. to
 
11 ft. 9 1/2 inches) (T)
[Input and Output connectors]
USB / A/V OUT jack:
 Video 
output
 Audio 
output
 USB 
communication
USB communication: Hi-Speed USB
 (USB 
2.0)
[Screen]
LCD screen:
 
7.5 cm (3.0 type) TFT drive
Total number of dots:
 
460 800 dots
[Power, general]
Power: LR6 (size AA) alkaline
 
batteries (4), 6 V
 
HR15/51: HR6 (size AA) Nickel-
 
Metal Hydride batteries (4) (sold
 separately), 
4.8 
V
Power consumption (during shooting):
 Approx. 
1.6 
W
Operating temperature:
 
0°C to 40°C (32°F to 104°F)
Storage temperature:
 
–20°C to +60°C (–4°F to +140°F)
Dimensions (CIPA compliant):
 
122.9 mm × 83.2 mm × 87.2 mm
 
(4 7/8 inches × 3 3/8 inches ×
 
3 1/2 inches)
 (W/H/D)
Mass (CIPA compliant) (including four
 
batteries and “Memory Stick Duo”
 media):
 
Approx. 530 g (1 lb 2.7 oz)
Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III:
 Compatible
Design and specifications are subject to
change without notice.
These specifications are extracted from the instruction manual 
of DSC-H100.
These specifications are extracted from the instruction manual 
of DSC-H200.
DSC-H100/H200
– 3 –
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0 OR DOTTED LINE WITH 
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS 
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY 
SONY. 
ATTENTION AU  COMPOSANT  AYANT  RAPPORT 
À  LA  SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 
0 SUR LES 
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT 
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES 
SUPPLÉMENTS PUBLIÉS PAR SONY.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety checks before releasing the set to the customer.
1.  Check the area of your repair for unsoldered or poorly-soldered 
connections. Check the entire board surface for solder splashes and 
bridges.
2.  Check the interboard wiring to ensure that no wires are “pinched” 
or contact high-wattage resistors.
3.  Look for unauthorized replacement parts, particularly transistors, 
that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.
4.  Look for parts which, through functioning, show obvious signs of 
deterioration. Point them out to the customer and recommend their 
replacement.
5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
 
•   Keep the temperature of the soldering iron around 350°C during 
repairing.
 
•   Do not touch the soldering iron on the same conductor of the circuit 
board (within 3 times).
 
•   Be careful not to apply force on the conductor when soldering or 
unsoldering.
Caution
Danger of explosion occurs if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
UNLEADED  SOLDER
This unit uses unleaded solder. 
Boards requiring use of unleaded solder are printed with the lead free 
mark (LF) indicating the solder contains no lead.
(Caution:  Some printed circuit boards may not come printed with the 
lead free mark due to their particular size.)
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
• 
Set the soldering iron tip temperature to 350°C approximately.
 
If cannot control temperature, solder/unsolder at high temperature 
for a short time.
 
Caution: The printed pattern (copper foil) may peel away if the 
heated tip is applied for too long, so be careful!
 
 
Unleaded solder is more viscous (sticky, less prone to 
flow) than ordinary solder so use caution not to let solder 
bridges occur such as on IC pins, etc.
• 
Be sure to control soldering iron tips used for unleaded solder and 
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
DSC-H100/H200
1-1
1. SERVICE  NOTE
1-1.
 
METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) 
Note1:  When replacing the Main Board Assy, erase the data in internal memory of main board before replacement.
Note2:  When replacing the Main Board Assy, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
1-3.
 
REGARDING FUSE
• MAIN BOARD (DSC-H100)
1-2.
 
DEDICATED A/V CABLE (OPTIONAL ACCESSORY)
Dedicated A/V cable is not supplied with this model.
For details of the dedicated A/V cable, refer to the “ACCESSORIES” page.
Method for Formatting the Internal Memory
Format
Formats the memory card or the internal memory. When you use a memory card with this camera for the
first time, it is recommended to format the card using the camera for stable performance of the memory
card before shooting. Note that formatting permanently erases all data on the memory card, and is
unrecoverable. Save precious data on a computer, etc.
1.  MENU 
 
 (Settings) 
 
 (Memory Card Tool) or 
 (Internal Memory Tool) 
 [Format] 
 [OK] 
 
Note
Note that formatting permanently erases all data including even protected images.
Copy
Copies all images in the internal memory to a memory card.
1.  Insert a memory card with sufficient free capacity into the camera.
2.  MENU 
 
 (Settings) 
 
 (Memory Card Tool) 
 [Copy] 
 [OK] 
 
Notes
Make sure there is sufficient battery power. Otherwise, the battery power may run out when you
attempt to copy image files, causing the copy to fail and possibly corrupt the data.
Images cannot be copied individually.
The original images in the internal memory are retained even after copying. To delete the contents
of the internal memory, remove the memory card after copying, then format the internal memory
([Format] in [Internal Memory Tool]).
A new folder is created on the memory card and all the data will be copied to it. You cannot choose
a specific folder and copy images to it.
Ref. No:
F1
Part No:
1-576-415-11
Description: FUSE, MICRO (1608 TYPE) (2A/32V)
Ref. No:
F2
Part No:
1-576-415-11
Description: FUSE, MICRO (1608 TYPE) (2A/32V)
Page of 17
Display

Download Sony DSC-H100 / DSC-H200 Service Manual (Repair Manual)

Here you can read online and download Sony DSC-H100 / DSC-H200 Service Manual in PDF. DSC-H100 / DSC-H200 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-H100 / DSC-H200 Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.