Read Sony XAV-65 Service Manual online
XAV-65
4
1. Press
the
[V] or [v] button, and select the alphanumeric char-
acter of “0 to F”.
2. The digit advances by pressing the [b] button.
The digit returns by pressing the [B] button.
3. The setting is completed by pressing the [ENTER] button, and
the initialization operation is done.
1-3. Destination Code
Destination
Destination code
US and Canadian models
000001
AEP and UK models
000000
Russian model
000004
E (NTSC) model
000003
E (PAL) model
000012
Saudi Arabia model
00001A
Indian model
000015
Australian model
00001C
2. Confi rmation After Destination Setting
Execute the following operation after completing the destination
setting, and confi rm a correct destination was set.
Execute the following operation after completing the destination
setting, and confi rm a correct destination was set.
Destination setting checking method:
1. In the state of source off (Home screen is displayed), enter the
1. In the state of source off (Home screen is displayed), enter the
test mode by pressing the buttons on the remote commander in
order of the [4]
order of the [4]
t [5] t [0] (press only the [0] button for two
seconds).
2. The following screen is displayed and confi rm that item of the
destination has been rewritten correctly.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<Test Mode>
4.VISUAL FACTORY MODE
6.DESTINATION SETTING MODE
DEST: UC REGION: 1
MCU: SONY-ST01-130929
Graphic: SONY-TW01-130929
Mecha: SONY-SP01-130929
Servo: HI6CD1-BBA-893D
MCU: SONY-ST01-130929
Graphic: SONY-TW01-130929
Mecha: SONY-SP01-130929
Servo: HI6CD1-BBA-893D
3. The resetting operation is executed by pressing the [ENTER]
button on the remote commander the confi rming ends, and the
unit returns to the normal condition.
unit returns to the normal condition.
NOTE OF REPLACING THE CHASSIS MAIN ASSY (CHA1)
When the chassis MAIN assy (CHA1) is replaced, the destination
setting is necessary.
When the chassis MAIN assy (CHA1) is replaced, the destination
setting is necessary.
Note: Remote commander is necessary.
1. Destination Setting
Set destination according to the procedure below.
Set destination according to the procedure below.
1-1. Setting the Destination Code
1. Set the demonstration mode OFF.
1. Set the demonstration mode OFF.
(Touch to select “Settings”
t “Screen Settings” t “Demo”
on the screen, and set the “OFF”.
2. In the state of source off (Home screen is displayed), enter the
destination setting mode by pressing the buttons on the remote
commander in order of the [4]
commander in order of the [4]
t [5] t [6] (press only the
[6] button for two seconds).
3. The following screen is displayed and the destination setting
mode becomes effective.
(Displayed characters/values in the following fi gure are ex-
ample)
Note: Refer to following “1-2. Entering the Destination Code” for opera-
tion method.
<DESTINATION SETTING MODE>
0
0 0 0 0 1
E U R : 0 0 0 0 0 0
E 1 7 : 0 0 0 0 1 2
R U 2 : 0 0 0 0 0 4
E A : 0 0 0 0 1 A
U C : 0 0 0 0 0 1
E : 0 0 0 0 0 3
I N : 0 0 0 0 1 5
E T 4 : 0 0 0 0 1 C
4. The resetting operation is executed by pressing the [ENTER]
button on the remote commander the setting ends, and the unit
returns to the normal condition.
returns to the normal condition.
1-2. Entering the Destination Code
Note: Input of the destination code cannot be performed by the keys of
main unit. Be sure to input the destination code by remote com-
mander.
mander.
• Method of operation by remote commander
Note
1: The model to which the remote commander is not attached
can also be operated by using the remote commander.
Note
2: The ten key cannot be used.
Ver. 1.1
Click on the first or last page to see other XAV-65 service manuals if exist.