MEX-BT5100 - Sony Car Audio Service Manual (repair manual). Page 12

Read Sony MEX-BT5100 Service Manual online

MEX-BT5100
12
182 mm
53 mm
1
2
1
2
3
A
B
q
q
Dashboard
Armaturenbrett
Tableau de bord
Cruscotto
Dashboard
Fire wall
Motorraumtrennwand
Paroi ignifuge
Parete tagliaﬁ amma
Brandschot
ʗ
ʘ
ʙ
ʓ
ʓ
ʖ
ʓ
Face the hook inwards.
Der Haken muss nach innen 
weisen.
Tournez le crochet vers 
l’intérieur.
Con il gancetto rivolto verso 
l’interno.
Het haakje moet naar binnen 
wijzen.
Claws 
Klammern
Griffes
Morsetti
Klemhaken
q
ʗ
q
Auxiliary power connector
Hilfsstromanschluss
Connecteur d’alimentation auxiliaire
Connettore di alimentazione accessoria
Hulpvoedingsaansluiting
Red
Rot
Rouge
Rosso
Rood
Red
Rot
Rouge
Rosso
Rood
Yellow
Gelb
Jaune
Giallo
Geel
Yellow
Gelb
Jaune
Giallo
Geel
Red
Rot
Rouge
Rosso
Rood
Red
Rot
Rouge
Rosso
Rood
Yellow
Gelb
Jaune
Giallo
Geel
Yellow
Gelb
Jaune
Giallo
Geel
Red
Rot
Rouge
Rosso
Rood
Red
Rot
Rouge
Rosso
Rood
Yellow
Gelb
Jaune
Giallo
Geel
Yellow
Gelb
Jaune
Giallo
Geel
the car without ACC position
Fahrzeug ohne Zubehörposition (ACC)
Véhicule sans position ACC
Auto priva della posizione ACC
Auto zonder ACC-positie
4
Yellow
Gelb
Jaune
Giallo
Geel
continuous power supply
permanente Stromversorgung
alimentation continue
alimentazione continua
continu voeding
7
Red
Rot
Rouge
Rosso
Rood
switched power supply
geschaltete Stromversorgung
alimentation commutée
alimentazione commutata
geschakelde voeding
4
Yellow
Gelb
Jaune
Giallo
Geel
switched power supply
geschaltete Stromversorgung
alimentation commutée
alimentazione commutata
geschakelde voeding
7
Red
Rot
Rouge
Rosso
Rood
continuous power supply
permanente Stromversorgung
alimentation continue
alimentazione continua
continu voeding
Precautions
•  Choose the installation location carefully so that the 
unit will not interfere with normal driving operations.
•  Avoid installing the unit in areas subject to dust, dirt, 
excessive vibration, or high temperature, such as in 
direct sunlight or near heater ducts.
•  Use only the supplied mounting hardware for a safe 
and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Removing the protection collar 
and the bracket 
Before installing the unit, remove the protection 
collar
ʗ and the bracket ʓ from the unit.
1
  Remove the protection collar 
ʗ.
Pinch both edges of the protection collar 
ʗ, then 
pull it out.
2
  Remove the bracket 
ʓ.
ɞ Insert both release keys ʖ together between 
the unit and the bracket 
ʓ until they click.
ɟ Pull down the bracket ʓ, then pull up the unit 
to separate.
Mounting example 
Installation in the dashboard

Notes
•  Bend these claws outward for a tight ﬁ t, if necessary (
Ǹ-2).
•  Make sure that the 4 catches on the protection collar 
ʗ are 

properly engaged in the slots of the unit (
Ǹ-3).
How to detach and attach the 
front panel 
Before installing the unit, detach the front panel.
ǹ-A To detach 
Before detaching the front panel, be sure to press 
ůƕƌƌŰ.
Press
ůƕƖƋƔŰ, then slide the front panel to the right 
side, and pull out the left side.
ǹ-B To attach 
Place the hole 
ʭ in the front panel onto the spindle ʮ
on the unit, as illustrated, then push the left side in.
Warning if your car’s ignition 
has no ACC position
After turning the ignition off, be sure to press 
and hold 
ůƕƌƌŰ on the unit until the display 

disappears.
Otherwise, the display does not turn off and this causes 
battery drain.
RESET button
When the installation and connections are completed, be 
sure to press the RESET button with a ballpoint pen, etc., 
after detaching the front panel.
Display
Click on the first or last page to see other MEX-BT5100 service manuals if exist.
Random: