CDX-V60 - Sony Car Audio Service Manual (repair manual). Page 18

Read Sony CDX-V60 Service Manual online

– 18 –
13.5 MHz Adjustment
Connection:
Adjustment Procedure:
1. Connect the frequency counter to IC205 pin @¶ (RCK) on the
MAIN board.
2. Put the set into play mode by loading the disc (HLV-401 (TGIS-
3)).
3. Adjust the CT201 on the MAIN board so that the frequency
counter reading is 13.5 MHz.
Connection and Adjustment Location: MAIN board
OSD Screen Adjustment
Adjustment Procedure:
1. Press the FM or AM key on the master unit (for the master
unit, see operating method of this set on page 3).
2. A graphic will be displayed on the monitor TV.
3. Under this condition, adjust the CT202 on the MAIN board so
that the graphic on the screen becomes A = B.
Adjustment Location: MAIN board
VIDEO SECTION
Setting:
Notes:
1. Perform adjustments in the order given.
2. Use HLV-401 (TGIS-3) disc (Part No.: 4-978-510-01) unless
otherwise indicated.
3. Use the oscilloscope with more than 10 M
 impedance.
4. Power supply voltage requirement: DC14.4 V (more than 3A)
Video CD Video Output Level Adjustment
Connection:
Adjustment Procedure:
1. Connect the oscilloscope to IC205 pin $¡ (BO) on the MAIN
boad.
2. Put the set into play mode by loading the disc (HLV-401 (TGIS-
3)).
3. Press the 
=, + keys (or 0, ) keys) on the master
unit to play the track No. 41 (White (100%)).
4. adjust the RV201 on the MAIN board so that the waveform on
the oscilloscope is as shown below.
VOLT/DIV: 500 mV (with the 10 : 1 probe in use)
TIME/DIV: 20 µsec
Connection and Adjustment Location: MAIN board
monitor TV
VIDEO OUT
jack
parking brake
terminal
connect to ground
set
+
frequency counter
MAIN board
IC205 pin 
 (RCK)
+
IC205 pin 
 (BO)
MAIN board
oscilloscope
0.95 to 1 Vp-p
A
B
A = B
Page of 51
Display

Click on the first or last page to see other CDX-V60 service manuals if exist.