CDX-V60 - Sony Car Audio Service Manual (repair manual). Page 14

– 14 –

1

5

gear
(FL driving A)

4

lever (T push)

2

3

lever (disc retainer)

2

cam gear (C)
ass’y

3

arm (chucking)
ass’y

3

retainer (disc)
ass’y

cam gear (C)

cam gear (C)

lever (disc retainer)

lever (T push)

Good

NG

roller

roller

parallel

slot

round
hole

outsert (OP) ass’y

1

lever (FLP) ass’y

4

reel stopper

3

cam gear (CTP)

2

arm (C/T selection)
ass’y

gear (SDP)

cam gear (CTP)

gear (SDP)

notch tooth
(1 peak)

pin

Follow the assembly procedure in the numerical order given.

1 Install the cam gear (C) ass’y.

(The cam gear (C) roller must securely enter the irregularly
shaped hole in the lever (disc retainer).)

2 Turn the cam gear (C) ass’y all the way clockwise.
3 Check that the lever (disc retainer) and arm (chucking) ass’y

each move in the direction of the arrow. (with the retainer (disc)
ass’y up in the direction of the arrow.)

4 Slide the lever (T push) all the way in the direction of the ar-

row.

5 Install the gear (FL drive A) so that the extension line between

the gear (FL driving A) slot 

 and round hole 

® is parallel

with the level (T push).
Rotate the gear (FL driving A) and check that it meshes.

1 Slide the lever (FLP) ass’y all the way in the arrow direction.
2 Move the arm (C/T selection) ass’y in the arrow direction.
3 Install the cam gear (CTP) with its notch tooth (1 peak) sec-

tion and the gear (SDP) meshing.
Rotate the cam gear (CTP) 1/4 turn to check that it operates
without catching or other obstruction.

4 Install the reel stopper.