CDX-V60 - Sony Car Audio Service Manual (repair manual). Page 15

– 15 –

stop ring (2.0)

reel stopper

arm (trigger E)

gear (EL 2)

outsert (OPT)
ass’y

chassis (FA)
ass’y

rectangular
hole

chassis (FA)
ass’y

gear (EL 2)

chassis
(FA) ass’y

outser (OPT)
ass’y

rectangular
hole

second
hole

first hole

gear (EL 1)

gear (EL 1)

gear (EL 1)

arm (trigger E)

arm (trigger E)

arm (trigger E)

gear (EL 1)

good

NG

A

good

NG

chassis (FA) ass’y

1. Remove the arm (trigger E) and gear (EL1).
2. Turning the two gears (EL2) changes the elevator height.Turn

the two gear (EL2) together and align the center of the rectan-
gular hole of the chassis (FA) ass’y with the outsert (OPT)
ass’y. (Elevator Address 1 adjustment)
* The left side gear (EL2) is harder to turn than the right side
gear (EL2) , so use some strength tuning it.

3. Without moving the two gear (EL2) , install the gear (EL1) so

that the second hole on the gear (EL1) is aligned with the hole
in the chassis (FA) ass’y.

4. Install the arm (trigger E) so that the arm (trigger E) A section

is directly above the hole in the gear (EL1).