CDX-G1170U, CDX-G3170UV - Sony Car Audio Service Manual (repair manual). Page 7

Before installing, make sure the catches on both 
sides of the bracket ʓ are bent inwards 2 mm (

3

/

32

 

in). When mounting in a Japanese car, see 
“Mounting the unit in a Japanese car” (page 18).

1

Position the bracket ʓ inside the 
dashboard, then bend the claws outward 
for a tight fit.

Mounting the unit in the dashboard

ʓ

182 mm (7 

1

/

4

 in)

53 mm (2 

1

/

8

 in)

Catch

When replacing the fuse, be sure 
to use one matching the 
amperage rating stated on the 
original fuse. If the fuse blows, 
check the power connection and 
replace the fuse. If the fuse blows 
again after replacement, there 
may be an internal malfunction. In such a case, 
consult your nearest Sony dealer.

Fuse replacement

Fuse (10 A)

2

Mount the unit onto the bracket ʓ, then 
attach the protection collar ͨ.

ˎ If the catches are straight or bent outwards, the unit 

will not be installed securely and may spring out.

ˎ Make sure the 4 catches on the protection collar ͨ 

are properly engaged in the slots of the unit.

ʓ

ͨ

ͩ

ͪ

Mounting the unit in a Japanese car

You may not be able to install this unit in some 
makes of Japanese cars. In such a case, consult your 
Sony dealer.

ͫ

to dashboard/center console

Existing parts supplied with 
your car

ͫ

Bracket

Bracket

ͫ

to dashboard/center console

Existing parts supplied with 
your car

ͫ

Bracket

Bracket

Note
To prevent malfunction, install only with the supplied 
screws ͫ.