Read Sony CDX-G1000U / CDX-G1000UE / CDX-G1001U / CDX-G1002U / CDX-G1050U / CDX-G1050UE / CDX-G1051U / CDX-G1070U / CDX-G1071U / CDX-G1080UM Service Manual online
CDX-G1000U/G1000UE/G1001U/G1002U/G1050U/G1050UE/G1051U/G1070U/G1071U/G1080UM
4
NOTE OF REPLACING THE COMPLETE MAIN BOARD
OR SYSTEM CONTROLLER (IC501)
When the complete MAIN board or system controller (IC501) is
replaced, the destination setting is necessary.
OR SYSTEM CONTROLLER (IC501)
When the complete MAIN board or system controller (IC501) is
replaced, the destination setting is necessary.
1. Destination Setting
Set destination according to the procedure below.
Set destination according to the procedure below.
1-1. Setting the Destination Code
1. In the state of source off (the clock is displayed), enter the test
1. In the state of source off (the clock is displayed), enter the test
mode by pressing the buttons in order of the [SHUF 4] t [5]
t [PAUSE 6] (press only the [PAUSE 6] button for two sec-
t [PAUSE 6] (press only the [PAUSE 6] button for two sec-
onds).
2. In the state in which the system controller version is displayed
on the liquid crystal display (refer to following fi gure), enter
the destination setting mode by pressing the buttons in order
of the [
the destination setting mode by pressing the buttons in order
of the [
> M
SEEK+] t [SEEK–
m
.
] t [PUSH EN-
TER/MENU].
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
System controller version
SHUF
3. Input the alphanumeric character of 12 digits of “F XXXXXX”
displayed on the liquid crystal display, and execute the destina-
tion setting.
tion setting.
Note: Refer to following “1-3. Entering the Destination Code” for opera-
tion method.
4. The resetting operation is executed by pressing the [
OFF
SRC] button for 1 second after the setting ends, and the unit
returns to the normal condition.
returns to the normal condition.
1-2. Display in Destination Setting Mode
(Displayed characters/values in the following fi gure are example)
(Displayed characters/values in the following fi gure are example)
Destination code
12 digit
OP5 OP4 OP3 OP2 OP1 OP0
SHUF
1-3. Entering the Destination Code
• Method of operation by main unit
• Method of operation by main unit
1. Rotate the control dial, and select the alphanumeric character
of “0 to F”.
2. The digit advances by pressing the [PUSH ENTER/MENU] or
[
> M
SEEK+] button.
The digit returns by pressing the [MODE ] or [SEEK–
m
.
] button.
3. The setting is completed by pressing the [PUSH ENTER/
MENU] button, and the initialization operation is done.
• Method of operation by remote commander
(CDX-G1050U/G1050UE/G1051U/G1070U/G1071U/
(CDX-G1050U/G1050UE/G1051U/G1070U/G1071U/
G1080UM only)
Note: The model to which the remote commander is not attached can
also be operated by using the remote commander.
1. Press the [V] or [v] button, and select the alphanumeric char-
acter of “0 to F”.
2. The digit advances by pressing the [b] button.
The digit returns by pressing the [B] button.
3. The setting is completed by pressing the [ENTER] button, and
the initialization operation is done.
– Continued on next page –
Ver. 1.2
Click on the first or last page to see other CDX-G1000U / CDX-G1000UE / CDX-G1001U / CDX-G1002U / CDX-G1050U / CDX-G1050UE / CDX-G1051U / CDX-G1070U / CDX-G1071U / CDX-G1080UM service manuals if exist.