Read Sony CDX-G1000U / CDX-G1000UE / CDX-G1001U / CDX-G1002U / CDX-G1050U / CDX-G1050UE / CDX-G1051U / CDX-G1070U / CDX-G1071U / CDX-G1080UM Service Manual online
CDX-G1000U/G1000UE/G1001U/G1002U/G1050U/G1050UE/G1051U/G1070U/G1071U/G1080UM
3
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The fl exible board is easily damaged and should be handled with
care.
static break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The fl exible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
Never look into the laser diode emission from right above when
checking it for adjustment. It is feared that you will lose your sight.
Never look into the laser diode emission from right above when
checking it for adjustment. It is feared that you will lose your sight.
If the optical pick-up block is defective, please replace the whole
optical pick-up block.
Never turn the semi-fi xed resistor located at the side of optical
pick-up block.
optical pick-up block.
Never turn the semi-fi xed resistor located at the side of optical
pick-up block.
optical pick-up
semi-fixed resistor
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong
viscosity
Unleaded solder is more viscous (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
TYPE A/B DISCRIMINATION OF MAIN BOARD
As for this unit, circuit on the MAIN board has been changed in the
midway of production. Repair after distinguishing each type unit
to doing the repair referring to the following.
As for this unit, circuit on the MAIN board has been changed in the
midway of production. Repair after distinguishing each type unit
to doing the repair referring to the following.
• Distinguish method by serial No.
(Serial No. is printed on the bottom side of this unit)
Model
Destination
Type A
Type B
CDX-G1000U
AEP, UK
1774954 or
smaller
1774955 or
larger
Russian
1620450 or
smaller
1620451 or
larger
CDX-G1000UE
Russian
1624970 or
smaller
1624971 or
larger
CDX-G1001U
AEP, UK
1775005 or
smaller
1775006 or
larger
CDX-G1002U
AEP, UK
1803255 or
smaller
1803256 or
larger
CDX-G1050U
E
1605800 or
smaller
1605801 or
larger
E (for CXS-G104SU) 1500000 or
smaller
1500001 or
larger
E (for CXS-G1016U) 1500000 or
smaller
1500001 or
larger
E (for CXS-G1069U) 1500000 or
smaller
1500001 or
larger
Saudi Arabia
1649656 or
smaller
1649657 or
larger
Mexican
1850585 or
smaller
1850586 or
larger
Argentina
1643884 or
smaller
1643885 or
larger
Korean
1642669 or
smaller
1642670 or
larger
CDX-G1050UE
Russian
1621450 or
smaller
1621451 or
larger
CDX-G1051U
E
1621750 or
smaller
1621751 or
larger
Saudi Arabia
1654494 or
smaller
1654495 or
larger
Korean
1654444 or
smaller
1654445 or
larger
CDX-G1070U
Indian
1617470 or
smaller
1617471 or
larger
CDX-G1071U
Indian
1654394 or
smaller
1654395 or
larger
CDX-G1080UM
Indian
1619850 or
smaller
1619851 or
larger
• Distinguish method by existence of IC.
– MAIN Board (Component Side) –
Type A : IC1301/1304 mount
Type B : IC1301/1304 no mount
Type B : IC1301/1304 no mount
IC1301
IC1304
1-888-974-21
Ver. 1.3
Click on the first or last page to see other CDX-G1000U / CDX-G1000UE / CDX-G1001U / CDX-G1002U / CDX-G1050U / CDX-G1050UE / CDX-G1051U / CDX-G1070U / CDX-G1071U / CDX-G1080UM service manuals if exist.