Read Sony TCM-900DV Service Manual online
TCM-900DV
7
Tape Speed Adjustment
Procedure :
Procedure :
TP8(GND)
TP47
RV601
RV401
DPC (MANUAL) Adjustment
RV602
RV603
RV604
IC401
1
48
Tape Speed
Adjustment
Adjustment
[MAIN BOARD] (B side)
Adjustment Location : Main board (B side)
set
test tape
WS-48A
(3kHz, 0dB)
WS-48A
(3kHz, 0dB)
10k
Ω
EAR (earphone) jack (J102)
digital frequency
counter
Note: Adjust on both sides DIR switch (S701) “ b “ and “ B “.
1. Set DPC switch (S904) to OFF, PITCH CONTROL switches
(S910, 911) to the center and play the test tape WS-48A.
2. Set REC TIME switch (S903) to NORMAL (4.8cm/s) and turn
SPEED CONTROL knob (RV901) fully to FAST.
3. Adjust RV601 so that the reading on the frequency counter
becomes 6000Hz.
4. Turn SPEED CONTROL knob (RV901) to the center and adjust
RV602 so that the reading on the frequency counter becomes
3010Hz.
3010Hz.
5. Set REC TIME switch (S903) to DOUBLE (2.4cm/s) and turn
SPEED CONTROL knob (RV901) fully to the center.
6. Adjust RV603 so that the reading on the frequency counter
becomes 1505Hz.
7. Turn SPEED CONTROL knob (RV901) fully to SLOW.
8. Adjust RV604 so that the reading on the frequency counter
8. Adjust RV604 so that the reading on the frequency counter
becomes 1050Hz.
9. Turn SPEED CONTROL knob (RV901) fully to FAST and
confirm the reading on the frequency counter becomes approx.
3010Hz.
3010Hz.
10. Set REC TIME switch (S903) to NORMAL (4.8cm/s) and turn
SPEED CONTROL knob (RV901) fully to SLOW.
11. Confirm the reading on the frequency counter becomes approx.
1505Hz.
Click on the first or last page to see other TCM-900DV service manuals if exist.