Read Sony TA-DA9000ES Service Manual online
13
5. Other Operations
(1) Selecting the speaker system ... User’s Manual
P.45
The front speaker output can be switched with the SPEAKERS FRONT switch. When A+B is
selected, the audio is output from the front speakers (A and B) in parallel connection.
In the same way, the surround speaker output can be switched with the SPEAKERS SURROUND
switch (Refer to
P.4
Table 1-1). If the speaker setting is changed, adjust the setting for the speaker’s
IMPEDANCE SELECTOR.
(2) Recording ... User’s Manual
P.46
If the 2ch analog input terminal is selected with REC OUT SELECTOR, the selected 2ch analog
input terminal audio is output from all of the analog 2ch output terminals. However, the signals are
looped in that case, and are not output from the selected IN terminals to the OUT terminals.
In addition, if the REC OUT SELECTOR is set to OFF, video and audio are not output from any
of the 2ch analog output terminals.
Table 1-5 REC OUT SELECTOR setting and output
• REC OUT SELECTOR: When set to TAPE
Terminal
name
VIDEO 1
VIDEO 2
VIDEO 3
TAPE
MD/DAT
INPUT
signal
VIDEO 1
VIDEO 2
VIDEO 3
TAPE
MD/DAT
OUTPUT
signal
TAPE TAPE TAPE None TAPE
• REC OUT SELECTOR: When set to VIDEO 2
Terminal
name
VIDEO 1
VIDEO 2
VIDEO 3
TAPE
MD/DAT
INPUT
signal
VIDEO 1
VIDEO 2
VIDEO 3
TAPE
MD/DAT
OUTPUT
signal
VIDEO 2
None
VIDEO 2
VIDEO 2
VIDEO 2
Click on the first or last page to see other TA-DA9000ES service manuals if exist.