Read Sony SS-AC3 Service Manual online
SS-AC3
9
2-8. TERMINAL BOARD ASSY (TB1)
Note 2: Please check direction of the upper and lower sides of terminal packing.
(Narrow side is the upper. Wide side is the bottom.)
Note 3: Check that terminal packing has not run aground with a terminal part.
Note 4: Push the whole terminal packing with a finger. Check the terminal
Note 4: Push the whole terminal packing with a finger. Check the terminal
packing not having shifted, not having floated or not being stuck.
Note 5: Check that terminal packing is not showing from screw holes of the
terminal board assy (TB1).
2 Pull out the terminal
board assy (TB1).
4 terminal packing
terminal board
assy “–” terminal
assy “–” terminal
terminal board
assy “+” terminal
assy “+” terminal
3 terminal [black]
terminal [black]
terminal [black]
3 terminal [red]
terminal [red]
terminal [red]
terminal [black]
WO board
wire [black]
wire [black]
terminal [red]
terminal packing
terminal
Narrow side
upper side
Wide side
– Rear view –
– Top view –
Note 6: Check direction of terminals.
(terminal (black) is left side.
terminal (red) is right side.)
Note 7: Check that the caulking part of a terminal
has faced upward.
Note 8: Be careful not to attach a crack to a speaker
cabinet using the terminal of a wire.
Note 9: Check whether the terminal is inserted
conversely.
Note 10: Insert the terminal straightly.
Note 11: After terminal insertion, should check
conversely.
Note 10: Insert the terminal straightly.
Note 11: After terminal insertion, should check
acting as lock of the terminal completely.
:LUHVHWWLQJ
+RZWRLQVWDOOWKHWHUPLQDOSDFNLQJ
1 four screws (3.5 u 20)
Note
1: tightening torTue 1. .1 Nm
5 terminal board assy
(TB1)
WO board
wire [red]
wire [red]
terminal
Click on the first or last page to see other SS-AC3 service manuals if exist.