Read Sony SS-AC3 Service Manual online
SS-AC3
6
2-5. SPEAKER (13 cm) (MIDRANGE) (SP4)
2 Pull out the speaker (13 cm) (midrange) (SP4).
3 terminal [black]
3 terminal [white]
speaker terminal
position
position
4 packing (13 cm)
Note
5: When installing the packing (13 cm), a glossy
surface is made into the speaker cabinet side,
and a rough side is made into the loudspeaker
side, and align the position of the screw hole
of packing (13 cm) and speaker cabinet.
5 speaker (13 cm) (midrange) (SP4)
Note
7: When installing the speaker (13 cm) (midrange) (SP4),
be careful not to attach a crack to a speaker cabinet using
the terminal of a wire.
Note
8: Be careful not to put a wire.
Note
9: Check that the connection mistake or insertion of a wire are
not
imperfect.
Note
10: Insert the terminal straightly.
Note
11: After terminal insertion, should check acting as lock of the
terminal
completely.
Note
12: Be careful not to attach a crack to the edge of a speaker cabinet.
Note
13: Check packing (13 cm) not being twisted or not having fallen
into a speaker cabinet.
Note 6: When installing the speaker (13 cm) (midrange) (SP4),
after each screw holes of the speaker (13 cm) (midrange)
(SP4) and packing (13 cm) are aligned, attach it to the
speaker
cabinet.
Note 1: When installing the speaker (13 cm) (midrange) (SP4),
install to a speaker cabinet after checking that a speaker
terminal is on the diagonal left.
Note 2: Do not touch the central part of the
speaker (13 cm) (midrange) (SP4).
Note 3: Check that the caulking portion of a terminal is inside suitable.
:LUHVHWWLQJ
speaker (13 cm) (midrange)
(SP4) “–” terminal
(SP4) “–” terminal
speaker (13 cm) (midrange)
(SP4) “+” terminal
(SP4) “+” terminal
terminal
WO board (MT2)
“M–” wire [black]
“M–” wire [black]
WO board (MT2)
“M+” wire [white]
“M+” wire [white]
1 four screws (3.5 u 20)
Note
4:
tightening torTue 1. .1 1m
Click on the first or last page to see other SS-AC3 service manuals if exist.