Read Sony SS-AC3 Service Manual online
SS-AC3
7
2-6. TW BOARD (MT1)
H
H
G
G
4 Remove the TW board block
in the direction of the arrow.
7 TW board (MT1)
3 Remove four catchers from four shafts
of the speaker cabinet.
1 terminal [orange]
(WO board IN “+”)
1 terminal [gray]
(WO board IN “–”)
6 two catchers
5 two spacers (MB)
6 two catchers
Note 5: Check that the caulking portion of a terminal is outside suitable.
Note 6: Check that the connection mistake or insertion of a wire are not imperfect.
Note 7: Insert the terminal straightly.
Note 8: After terminal insertion, should check acting as lock of the terminal completely.
Note 6: Check that the connection mistake or insertion of a wire are not imperfect.
Note 7: Insert the terminal straightly.
Note 8: After terminal insertion, should check acting as lock of the terminal completely.
2 tapping screw (3.5 u 16)
Note
1: When tightening screws, be careful
not to put the wire.
Note
2: Check that the screw has not floated
or it is not slanting.
Note
3: When tightening screws, be careful
so that screw driver and screw do not
touch
capacitor.
Note
4: tightening torTue . . 1m
TW board (MT1)
TW board
“TW IN–” wire
[gray]
“TW IN–” wire
[gray]
TW board
“TW IN+” wire
[orange]
“TW IN+” wire
[orange]
:LUHVHWWLQJ
caulking portion
terminal
TW board block
shaft
shaft
shaft
shaft
–6SHDNHUFDELQHWULJKWLQVLGHFURVVVHFWLRQDOYLHZ–
Click on the first or last page to see other SS-AC3 service manuals if exist.