Read Sony NWZ-E463 / NWZ-E463HK / NWZ-E463K / NWZ-E464 / NWZ-E464K / NWZ-E465 Service Manual online
NWZ-E463/E463HK/E463K/E464/E464K/E465
10
2-3. CASE (REAR) ASSY BLOCK
guide (hold)
switch
Note: When installing panel (rear) assy
block, the position of switch and
guide (hold) is set and installed.
1
screw
(B1.4)
3 guide (hold)
4 case (rear) assy block
2
2-4. OPEN THE SHORT-LAND
Note 1: This illustration sees the mechanical commonness block from LCD assy side.
Note 2: Make sure to remove one solder to become an open state before disassembling the mechanical commonness block.
Note 3: Solder the short-land after all wirings are connected when you exchanged some mounted board.
Note 2: Make sure to remove one solder to become an open state before disassembling the mechanical commonness block.
Note 3: Solder the short-land after all wirings are connected when you exchanged some mounted board.
1 Remove the solder of short-land (SL9501).
Click on the first or last page to see other NWZ-E463 / NWZ-E463HK / NWZ-E463K / NWZ-E464 / NWZ-E464K / NWZ-E465 service manuals if exist.