Read Sony NWZ-E463 / NWZ-E463HK / NWZ-E463K / NWZ-E464 / NWZ-E464K / NWZ-E465 Service Manual online
NWZ-E463/E463HK/E463K/E464/E464K/E465
6
1-3. How to use the destination setting tool
Note 1: Please use this tool after closing other application software.
Will be described with below conditions as an example.
Model :
Model :
NWZ-E463/E464/E465
Destination : E
Procedure:
1. Turn on power of the WALKMAN, and connect it to PC.
2. Start the command prompt application software, and change
1. Turn on power of the WALKMAN, and connect it to PC.
2. Start the command prompt application software, and change
the folder pass to your desired folder.
(Example:
C:\change_destination_NWZE460_E)
C:\>cd c:\change_destination_NWZE460_E
C:\change_destination_NWZE460_E>
3. Input “updating-mtp” and press the Enter key on PC.
C:\change_destination_NWZE460_E>updating-mtp
4. If the following message is displayed, input “y” and press the
Enter key on PC.
Note 2: When the Enter key on PC is pressed, the WALKMAN is format-
ted.
MTP F/W Update will start.
The WALKMAN unit reboots automatically after updating.
Before starting this program, close other application such
as WMP, Napster and Rhapsody etc.
Does this program run? (y/n)
C:\change_destination_NWZE460_E>rem #
5. The following message is displayed. Then, destination setting
operation starts.
F/W Updating starts.
Please wait for a while until updating is completed.
C:\change_destination_NWZE460_E>exit
6. The WALKMAN reboots automatically after the destination
data is updated. After rebooting, check that connecting USB
(MTP) is displayed on the liquid crystal display of the WALK-
MAN.
(MTP) is displayed on the liquid crystal display of the WALK-
MAN.
7. Input “EXIT” to close the command prompt application soft-
ware.
8. Disconnect the WALKMAN from PC.
9. Turn the power on of the WALKMAN.
10. Press the [BACK] key for more 1.5 seconds, the home menu is
9. Turn the power on of the WALKMAN.
10. Press the [BACK] key for more 1.5 seconds, the home menu is
displayed.
11. Slide the [HOLD] key from OFF to ON.
12. Press the key as following order.
[
b
]
[VOL –] [VOL +] [
B
]
[BACK]
[
u
]
[
B
]
[
u
]
[BACK] [
b
]
13. The WALKMAN reboots and the color bar is displayed on the
liquid crystal display.
14. Enter the test mode when any keys are pressed in the state of
step 13, and slide the [HOLD] key from ON to OFF.
15. Press the [
v
]/[
V
] keys to select the “OTHER”, and press the
[
B
] key to enter the minor item.
16. Press the [
v
]/[
V
] keys to select the “DEST”.
17. Press the [
u
] key, and check if the destination is updated
properly.
MATAPP (X.XX.XX)
POWER
AUDIO
VIDEO
VIDEO OUT
OTHER
CLESTE
DAC
DIREC
FM
SHUTDOWN
EXITTEST
CLOCK
KEY
KEYNUM
FORMAT
DEST
SPSET
FWVER
NCAPCHK
KEY
KEYNUM
FORMAT
DEST
SPSET
FWVER
NCAPCHK
OTHER DEST
E [ SPS: OFF ]
18. Press the [BACK] key twice, return to major item selection
screen.
19. Press the [
v
]/[
V
] keys to select the “EXITTEST”, and press
the [
B
] key to select the “SURE ?”.
20. Press the [
u
] key, turn the power off and release the test
mode.
Note: Execute “Reset all settings” absolutely at the end (Refer to right).
2. Format
Formatting memory [Format]
You can format the built-in fl ash memory of your “WALKMAN.”
Formatting memory [Format]
You can format the built-in fl ash memory of your “WALKMAN.”
Note:
• If the memory is formatted, all data (songs, videos, photos, etc.,
• If the memory is formatted, all data (songs, videos, photos, etc.,
including sample data installed at the factory, bundled software in-
staller, and the User Guide) will be erased. Be sure to verify the data
stored in memory prior to formatting, and export any important data
to the hard disk of your computer.
staller, and the User Guide) will be erased. Be sure to verify the data
stored in memory prior to formatting, and export any important data
to the hard disk of your computer.
• Be sure not to initialize (format) the built-in fl ash memory of your
“WALKMAN” using Windows Explorer. If you have formatted with
Windows Explorer, format again using your “WALKMAN.”
Windows Explorer, format again using your “WALKMAN.”
1. From the Home menu, select
[Settings]
, [Common Set-
tings]
, [Reset/Format] , [Format].
2. Select
[Yes].
[All data will be deleted. Proceed?] appears.
3. Select
[Yes].
When
initialization
fi nishes, [Memory formatted.] appears.
3. Reset all setting
Returning to the factory settings [Reset All Settings]
You can reset your “WALKMAN” to the default settings. Reset-
ting your “WALKMAN” will not delete data such as music, video,
and photos.
Returning to the factory settings [Reset All Settings]
You can reset your “WALKMAN” to the default settings. Reset-
ting your “WALKMAN” will not delete data such as music, video,
and photos.
1. From the Home menu, select
[Settings]
, [Common Set-
tings]
, [Reset/Format] , [Reset All Settings] , [Yes].
Note:
• If you select this function during playback, your “WALKMAN” will
• If you select this function during playback, your “WALKMAN” will
pause playback before performing the reset process.
Click on the first or last page to see other NWZ-E463 / NWZ-E463HK / NWZ-E463K / NWZ-E464 / NWZ-E464K / NWZ-E465 service manuals if exist.