Read Sony NWZ-E353 / NWZ-E354 / NWZ-E355 Service Manual online
NWZ-E353/E354/E355
9
2-4. OPEN THE SHORT-LAND
Note 1: This illustration sees the mechanical commonness block from LCD assy side.
Note 2: Make sure to remove one solder to become an open state before disassembling the mechanical commonness block.
Note 3: Solder the short-land after all wirings are connected when you exchanged some mounted board.
Note 2: Make sure to remove one solder to become an open state before disassembling the mechanical commonness block.
Note 3: Solder the short-land after all wirings are connected when you exchanged some mounted board.
2-5. EMMC BOARD
1 Remove the solder of short-land (SL9501).
3
1 cushion (NAND)
4 spacer (NAND)
– Rear side view –
2 connector
Note: Lift vertically the EMMC board
when you remove the connector.
5 EMMC board
Click on the first or last page to see other NWZ-E353 / NWZ-E354 / NWZ-E355 service manuals if exist.