Read Sony NWZ-E353 / NWZ-E354 / NWZ-E355 Service Manual online
NWZ-E353/E354/E355
5
5. The following message is displayed. Then, destination setting
operation starts.
F/W Updating starts.
Please wait for a while until updating is completed.
6. The WALKMAN reboots automatically after the destination
data is updated. After rebooting, check that connecting USB
(MTP) is displayed on the liquid crystal display of the WALK-
MAN.
(MTP) is displayed on the liquid crystal display of the WALK-
MAN.
7. Input “EXIT” to close the command prompt application soft-
ware.
8. Disconnect the WALKMAN from PC.
9. Turn the power on of the WALKMAN.
10. Press the [BACK] key for more 1.5 seconds, the home menu is
9. Turn the power on of the WALKMAN.
10. Press the [BACK] key for more 1.5 seconds, the home menu is
displayed.
11. Slide the [HOLD] key from OFF to ON.
12. Press the key as following order.
[
12. Press the key as following order.
[
B
]
→ [
b
]
→ [VOL +] → [VOL –] → [
B
]
→ [
b
]
→
[OPTION]
→ [BACK] → [OPTION] → [BACK]
13. The WALKMAN reboots and the color bar is displayed on the
liquid crystal display.
14. Enter the test mode when any keys are pressed in the state of
step 13, and slide the [HOLD] key from ON to OFF.
15. Press the [
v
]/[
V
] keys to select the “OTHER”, and press the
[
B
] key to enter the minor item.
16. Press the [
v
]/[
V
] keys to select the “DEST”.
17. Press the [
u
] key, and check if the destination is updated
properly.
MATAPP (X.XX.XX)
POWER
AUDIO
VIDEO
VIDEO OUT
OTHER
CLESTE
DAC
DIREC
FM
SHUTDOWN
EXITTEST
CLOCK
KEY
KEYNUM
FORMAT
DEST
SPSET
FWVER
NCAPCHK
KEY
KEYNUM
FORMAT
DEST
SPSET
FWVER
NCAPCHK
OTHER DEST
CEW [ SPS: OFF ]
18. Press the [BACK] key twice, return to major item selection
screen.
19. Press the [
v
]/[
V
] keys to select the “EXITTEST”, and press
the [
B
] key to select the “SURE ?”.
20. Press the [
u
] key, turn the power off and release the test
mode.
Note: Execute “Reset all settings” absolutely at the end (Refer to “3. Reset
all setting”).
2. Format
Formatting memory [Format]
You can format the built-in fl ash memory of the player.
Formatting memory [Format]
You can format the built-in fl ash memory of the player.
Note:
• If the memory is formatted, all data (songs, videos, photos, etc.,
• If the memory is formatted, all data (songs, videos, photos, etc.,
including sample data installed at the factory, bundled software in-
staller, and the User Guide) will be erased. Be sure to verify the data
stored in memory prior to formatting, and export any important data
to the hard disk of your computer.
staller, and the User Guide) will be erased. Be sure to verify the data
stored in memory prior to formatting, and export any important data
to the hard disk of your computer.
• Be sure not to initialize (format) the built-in fl ash memory of the
player using Windows Explorer. If you have formatted with Win-
dows Explorer, format again using the player.
dows Explorer, format again using the player.
1. From the Home menu, select [Settings]
, [Common Set-
tings]
, [Reset/Format] , [Format].
[All data including songs will be deleted. Proceed?] appears.
2. Select [Yes].
[All data will be deleted. Proceed?] appears.
To cancel the operation, select [No].
3. Select [Yes].
When initialization fi nishes, [Memory formatted.] appears.
To cancel the operation, select [No].
3. Reset all setting
Returning to the factory settings [Reset All Settings]
You can reset the player to the default settings. Resetting the player
will not delete data such as music, video, and photos.
Returning to the factory settings [Reset All Settings]
You can reset the player to the default settings. Resetting the player
will not delete data such as music, video, and photos.
Note:
• If you select this function during playback, the player will pause
• If you select this function during playback, the player will pause
playback before performing the reset process.
1. From the Home menu, select [Settings] , [Common Set-
tings] , Reset/Format] , [Reset All Settings] , [Yes].
[Restored factory settings.] appears.
• To cancel the operation, select [No] on the confi rmation screen.
4. Wallpapers setting
How to install the wallpaper fi les into the WALKMAN.
How to install the wallpaper fi les into the WALKMAN.
Note: Confi rm the method of obtaining the
wallpaper fi les
to the service
headquarters.
Procedure:
1. Unzip the wallpaper fi les to get the following fi les (jpeg fi le).
1. Unzip the wallpaper fi les to get the following fi les (jpeg fi le).
Folder name: WALLPAPERS
W001.jpg
W002.jpg
W003.jpg
2. Connect the WALKMAN to PC.
3. Start up windows explorer. Then, open [WALKMAN] - [Stor-
3. Start up windows explorer. Then, open [WALKMAN] - [Stor-
ageMedia].
4. Open “PICTURE” folder located under “StorageMedia” fold-
er.
5. Copy the “WALLPAPERS” folder in step 2 under the “PIC-
TURE” folder.
COLOR VARIATION
Model
Destination
Color
Black
Red
Blue
NWZ-E353
US
z
z
z
Canadian
z
–
–
AEP
z
z
–
East European
z
–
–
South African
z
z
–
Indian
z
z
–
NWZ-E354
US
z
z
z
Canadian
z
z
z
AEP
z
z
–
NWZ-E355
Canadian
z
z
z
Ver. 1.1
Click on the first or last page to see other NWZ-E353 / NWZ-E354 / NWZ-E355 service manuals if exist.