Read Sony NW-E10 / NW-E7 Service Manual online
8
NW-E7/E10
Ver 1.1 2002.01
Work procedure
2. Execution of Play Info Initialize
2. Execution of Play Info Initialize
If the MAIN board was replaced for repair, execute “Play Info Initialize” in block qd to return respective functions to initial positions
(see Table 1-6).
Note: In executing the “Play Info Initialize”, set the slide switches to the following positions.
(see Table 1-6).
Note: In executing the “Play Info Initialize”, set the slide switches to the following positions.
AVLS switch ..... NORM
HOLD switch .... OFF
HOLD switch .... OFF
3. Check after Work
(1) After work, check that the set operates normally through the operation in 1-3. “Operation Check for Inspection (Test Mode)” (see
page 3).
(2) Make sure that the check-out and check-in can be made using the PC applications “OpenMG Jukebox” (CODEC programs “MP3”
and “ATRAC3”) and “Windows Media Player 7” (CODEC program “WMA”). Also, make sure that the checked out data can be
played normally.
Note: Do not start up the “OpenMG Jukebox” and the “Windows Media Player 7” simultaneously.
played normally.
Note: Do not start up the “OpenMG Jukebox” and the “Windows Media Player 7” simultaneously.
(3) For an installation and acquisition method of “Windows Media Player 7” (CODEC program “WMA”), refer to the following
instruction.
Table 1-6
Position
Head of first music
25
OFF
OFF
OFF
Function
Play position
VOL level
MEGA BASS
AVLS
PLAY MODE
Click on the first or last page to see other NW-E10 / NW-E7 service manuals if exist.