Read Sony ICD-UX502 Service Manual online
ICD-UX502
16
4-10. ZLOAD
The battery load check can be operated compulsorily.
The battery load check can be operated compulsorily.
Procedure:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
>
] or [
.
] keys to select the “ZLOAD”, and
press the [
N
/ENTER] key.
3. ON/OFF of ZLOAD is changed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<ZLOAD>
ZLOAD : OFF
ZLOAD : OFF
LCD Display
Key input settings under this mode of operation:
[
>
] or [
.
] : ZLOAD_CTL change (H ↔ L)
Releasing method:
Press the [STOP/
Press the [STOP/
x
] key, return to test mode menu.
4-11. LOW
DET
LOWBATT_XDET (Battery voltage decrease detection signal)
can be checked.
can be checked.
Procedure:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
>
] or [
.
] keys to select the “LOW DET”, and
press the [
N
/ENTER] key.
3. The state of LOW DET is displayed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<LOW DET>
LOW DET: OFF
LOW DET: OFF
LCD Display
OFF : LOWBATT_XDET=1 (H)
ON : LOWBATT_XDET=0 (L)
Releasing method:
Press the [STOP/
Press the [STOP/
x
] key, return to test mode menu.
4-12. VBUS
VBUS detection signal can be checked.
VBUS detection signal can be checked.
Procedure:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
>
] or [
.
] keys to select the “VBUS”, and press
the [
N
/ENTER] key.
3. The state of VBUS_XDET is displayed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<VBUS>
OFF
OFF
LCD Display
OFF
:
VBUS_XDET=1
(H)
ON
:
VBUS_XDET=0
(L)
Key input settings under this mode of operation:
[
N
/ENTER] : It shifts to the suspension state.
Remove battery, in order to be released from
the suspension state.
Releasing method:
Press the [STOP/
Press the [STOP/
x
] key, return to test mode menu.
4-13. KEY
COUNT
The count value of the keys and switches operation can be dis-
played. However, distinction of kind of the keys and switches
which operated is not performed.
played. However, distinction of kind of the keys and switches
which operated is not performed.
Note: It cannot move to other modes from this mode.
Procedure:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
>
] or [
.
] keys to select the “KEY COUNT”,
and press the [
N
/ENTER] key.
3. The count value of the keys and switches operation is dis-
played.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<KEY COUNT>
00888
00888
LCD Display
Count value increase conditions:
One of buttons is pushed.
One of switches is slid.
Headphone or microphone is inserted.
Releasing method:
Remove battery.
Remove battery.
Click on the first or last page to see other ICD-UX502 service manuals if exist.